Manual

Use a 5/16" or 8 mm drill bit. Drill hole depth - 2" or 50 mm.
Suggested drill speed: 1000-1300 rpm
Use a 7/8" or 22 mm socket.




7/8" or 22 mm socket
Suggested speed: 1000-1300 rpm.
Push in threaded rod.
Fully tighten threaded
rod.
TECHNICAL SUPPORT:
www.erico.com
CFS414_C
INSTRUCTION SHEET
2 OF 2 © 2009, 2010 ERICO International Corporation


