Use and Care Manual

Item no: 07494
CARRIER ASSEMBLY
Step 1: Attaching Support Bracket
• Place the carrier (#1) on a flat and secure work area that is able to support
the weight of the carrier.
• Align the square holes on the support bracket (#3) with the square holes on the edge of the carrier.
• To secure the support bracket to the carrier, slide the M10 Carriage Bolts (#2) through the square holes
and tighten using the U-Clamp (#4) and M10 Lock Nut (#5)
• See FIG 1 for illustration.
à travers les orifices carrés et resserrez-les à l’aide d’une l’attache en “U” et d’un contre-écrou M10.
• Consultez le dessin de la FIG 1.
Tools Required:
FIG 1
PARTS NEEDED
#1. Carrier
#2. M10 Carriage Bolt
#3. Support Bracket
#4. U Clamp
#5. M10 Lock Nut
#
#
#
#
#
Open Wrench
Size = 24 mm
Open Wrench
Size =16 mm
Adjustable Wrench
Size = 30 mm
Hex Key
Size = 6 mm