www.ericasynths.
ERICA FUSION ANALOGUE DELAY/CHORUS MODULE THANK YOU FOR ORDERING ERICA FUSION ANALOGUE DELAY/CHORUS MODULE! The Erica Synths Fusion series modules are designed combining vacuum tubes and semiconductors therefore they bring warm, powerful sound and crazy overdrive possibilities of vacuum tubes into your modular system.
TECHNICAL SPECS: TECHNICAL SPECS: INPUT SIGNAL LEVEL: up to 20V ptp OUTPUT LEVEL: 10V ptp DELAY TIME: 0.5ms - 51ms PANEL WIDTH: 17HP ERICA FUSION 6V AC PSU INSTALLATION It is advised that installation is performed by person, who has experience working with 220/110V voltages. Before installing the PSU, make sure your modular system is turned off and disconnected from wall power socket.
ERICA FUSION 6V AC PSU INSTALLATION Use spacers and screws supplied with the Erica Fusion PSU kit to fix it in your modular case next to the eurorack power supply unit! Disconnect 220/110V wires from eurorack PSU! Connect 220/110V wires to relevant lugs of Erica Fusion PSU!
ERICA FUSION 6V AC PSU INSTALLATION Use wires supplied with the Erica Fusion PSU kit to connect eurorack PSU back! One side of Erica Fusion PSU 6VAC output has to be connected to the GND of your modular system. Use the wire supplied with the kit to do so. Since 6VAC circuit is isolated, nothing wrong or critical will happen, if you connect this wire somewhere incorrectly. But that may affect quality of sound of Erica Fusion modules.
SAFETY INSTRUCTIONS PLEASE FOLLOW THE INSTRUCTIONS FOR USE OF THE ERICA FUSION ANALOGUE CHORUS/DELAY! BELOW, ‘CAUSE ONLY THIS WILL GUARANTEE PROPER OPERATION OF THE MODULE AND ENSURE WARRANTY FROM ERICA SYNTHS. When installing and connecting the module, make sure your modular system is turned off and disconnected from wall power socket. Mind the polarity of eurorack PSU power cable! Follow signs on the PCB! 6VAC cable doesn’t have polarity and you can’t go wrong with connecting it.
