User`s guide

888-24-228-G-00 rev.B • 07/13
9 of 15
8
7
a
a
b
b
5/16"
(8 mm)
Ø 1/8" (3 mm)
4x
ST3.9 x 16mm
Set-up Steps
Drill holes into bottom of work surface 5/16" (8 mm) deep.
TIP: To ensure proper depth, place a piece of tape on the drill
bit 5/16" (8 mm) from the tip.
Place the Brake Handle on the work surface at desired location. For easy access, line
up the brake handle  ush with the front edge of the worksurface.
Mark holes to drill.
Attach Brake Handle.