User`s guide

888-24-228-G-00 rev.B • 07/13
14 of 15
APPENDIX B - Inserting Stop Screw
WARNING. Before shipping or storing the desk, or in cases where the desk is placed on it’s back
or side*, it is extremely important that the stop screw be re-inserted. Failure to follow these
instructions may cause lift engine to expand rapidly and may result in equipment damage and
or personal injury.
1. Follow instructions in Appendix A to minimize lift strength.
2. Push the desk down to its lowest position.
3. Insert stop screw at the bottom of leg.
4. Once the stop screw has been
installed the desk can be shipped
or stored.
* Placing the desk on its back or side is not recommended.