User's Guide Zip40 Charging & Management Cart ENGLISH Components A 1 B Tools Needed 4x 2x M5 x 10mm 4x 2 M5 8mm 3 9x For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska 888-24-324-G-01 rev.
Hazard Symbols Review Symbol These symbols alert users of a safety condition that demands attention. All users should be able to recognize and understand the significance of the following Safety Hazards if encountered on the product or within the documentation.
Features & Specifications OPTIONAL Four 12V continuous operating fans External auxiliary outlet 2 receptacles – US, JP 1 receptacle – EU, UK, AU, CN Power Button Lock not included Cable wrap 4x ENGLISH A < 25 lbs. (11.3 kg) B < 76.5 lbs. (34.7 kg) C < 76.5 lbs. (34.7 kg) D < 76.5 lbs. (34.7 kg) A + B + C + D + E < 255 lbs. (116 kg) CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 888-24-324-G-01 rev.
Open doors. ENGLISH 1 4 of 19 888-24-324-G-01 rev.
2 Choose configuration for number of devices. 40x Cart is already configured for this, please skip to page 9. Slot Size: 1.1" (27.9 mm) 15x 15x 9 10x ENGLISH 30x Dividers and Ethernet cables will need to be reconfigured for this set up, please see instructions on pages 6-8. Slot Size: 1.4" (35.6 mm) 10x 10x 6 10x 888-24-324-G-01 rev.
30x a Unplug power cable from cart and remove side cover. WARNING MOVING PARTS CAN CRUSH AND CUT Unplug power cord. DO NOT place hands on or near fans. Placing hands on or near fans may cause equipment damage and/or serious personal injury. 828-196 ENGLISH WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place hands on or near fans. Placing hands on or near fans may cause equipment damage and/or serious personal injury. b To configure for 30 devices, remove dividers. i.
30x c To configure for 30 devices, reroute cables. i. Remove cable tray 3x screws. ii. Press tab to release clip and lower cable tray. i d ii To configure for 30 devices, reroute cables. i. Remove cable clips. ii. Remove Ethernet cables in rows 2, 5, 8, 11, 14 and keep or route cables in rows 1*, 3*, 4*, 6*, 7*, 9*, 10*, 12*, 13*, 15*. iii. Reattach cable clips. ENGLISH i ii iii 888-24-324-G-01 rev.
30x e Reattach cable trays. ii ENGLISH i f To configure for 30 devices, reattach dividers, 10 per shelf. i. Insert tabs on bottom of divider into designated holes on shelf. ii. Slide divider away from you to lock into place. i ii 8 of 19 888-24-324-G-01 rev.
40x 3 30x Attach spacers if your devices are < 9" (229 mm). 40x 3x ENGLISH 2x 30x 3x 888-24-324-G-01 rev.
4 a 5 Remove back panel. b c Plug in and route power cables. There are different instructions for each type of power cable. Follow the instructions that match your style power cable. ENGLISH 12 a. Plug in the power cables for the top shelf. Use the top row of outlets, and for the 40 device configuration, every other outlet on the second row. Store the power cables in the top basket. b. Route the device plugs between the basket and the top outlet row and up through the top of the dividers.
d. Plug in the power cables for the Middle shelf. Use the entire third outlet row, and for the 40 device configuration, the remaining outlets on the second row. Store the power cables from the second outlet row in the top basket and the power cables from the third row in the bottom basket. e. Route the device plugs under the third outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device. f. Bundle cables and store in the baskets. d e ENGLISH g.
Remove the baskets designed to hold the power supplies that are not present with this type of power cable. a. Lift basket up to unlock tab. b. Pull basket out. c. Lift bottom basket up to unlock tab then pull out. ENGLISH a b c d. Plug in the power cables for the top shelf. Use the top row of outlets, and for the 40 device configuration, every other outlet on the second row. Route the device plugs under the top outlet row and up through the top of the dividers.
6 Attach back panel. a b c Optional Wireless Access Point (WAP) and Switch installation (not included). ENGLISH 7 Unplug power cable from cart and remove side cover. WARNING MOVING PARTS CAN CRUSH AND CUT Unplug power cord. DO NOT place hands on or near fans. Placing hands on or near fans may cause equipment damage and/or serious personal injury. 828-196 888-24-324-G-01 rev. B • 01/15 WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place hands on or near fans.
ENGLISH 8 9 Ethernet switch attachment: a. Attach unit to cart. b. Plug in external Ethernet cable and WAP Ethernet cable to switch. c. Plug in Ethernet cables from devices. d. Store excess cables between switch and cart. e. Follow manufacturers instructions for WAP and Switch set up. 4x a 14 of 19 Access door to unplug WAP. Attach WAP with velcro strap. Plug WAP into Auxiliary outlet. 4x M5 x 10mm M5 8mm b c d 888-24-324-G-01 rev.
10 Attach side cover and plug power cable back into cart. NOTE: Route external Ethernet cable through side cover access door. a b Plug in and insert devices. 12 Plug in power and Ethernet cables and turn cart power on. 888-24-324-G-01 rev.
Cleaning and Maintenance WARNING: Failure to observe the following safety notices may result in serious personal injury or equipment damage. Inspect for damage, dirt and debris on a regular basis. All paint and plastic components used in the Cart will withstand cleaning by most commonly used, diluted, nonabrasive solutions such as quaternary ammonia compounds, ammonia enzyme cleaners, bleach, or alcohol solutions.
Safe Use Recommendations There are specific risks associated with the use of Cart when moving or stationary (for charging or storage). You must be aware of, and avoid these risks when the Cart is located in close proximity to children. WARNING: Failure to observe the following Cart Use Safety notices may result in serious personal injury or equipment damage. Only Adults should move this cart. • Do not allow anyone to sit, stand, or climb on the Cart. • Do not lift the Cart from the bottom.
Specifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES3(A)/NMB-3(A). Changes or modifications not expressly approved by the Ergotron could void the user's authority to operate the equipment. Cart dimensions 30.3"W x 45.4"H x 26.
For local customer care phone numbers visit: http://contact.ergotron.com NOTE: When contacting customer service, reference the serial number. ENGLISH © 2015 Ergotron, Inc. 888-24-324-G-01 rev.
