Orderguide Ergotron Flat Panel Monitor Mounting Solutions ® Maximize the effectiveness of Flat Panel Monitors 870-03-005, rev. 11/18/04 www.ergotron.com © 2004 Ergotron, Inc.
Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or in part for any purpose other than that authorized by Ergotron, Inc. is prohibited. © 2004 Ergotron, Inc. All rights reserved.
Orderguide Flat Panel Mounting Solutions Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to Select Mounting Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . Flat Panel Mounting Solutions Product Overview . . . . . . . . . . . . . . . . 4 5 Mounting Solutions Product Selection . . . . . . . . . . . . . . . . . . 6 400 Series . . . . . . . . . . . 300 Series . . . . . . . . . . . 200 Series . . . . . . . . . . .
Introduction lat panel monitors provide space-saving convenience. Ergotron’s Flat Panel Mounting Solutions deliver this technology where you need it. Patented Mounting Solution products instantly lift, swing, tilt and rotate for optimum ergonomic positioning without the need for knobs or adjustment levers. Our patented Paraview Technology allows multiple monitors to be attached to a single arm or stand. In short, Ergotron’s Flat Panel Mounting Solutions increase work space while improving productivity.
Flat Panel Mounting Solutions Product Overview Monitor Suspension Surface Attachments 400 Series Wall Tracks Wall Plates 300 Series Accessory Options Keyboard/Mouse Trays, Laptop Trays Wrist Rests & Mouse Pads Extenders 200 Series Slatwall Components Monitor Interface Accessories 100 Series Command Posts CPU Holders & Storage Components DS Series Pole Mounts Ergotron Carts MD Series Desk Mounts HD Series Furniture Mounts Mobile WorkStand StyleView™ Flat Panel Cart (StyleView™ Laptop Car
Mounting Solutions Product Selection 400 Series The 400 Series provides up to 24 inches (610 mm) of vertical, sit-to-stand adjustability – enough to accommodate sitting and standing users at the same workstation! 400 Series Mounting Solutions also provide smooth adjustment while maintaining touch-screen stability. Other features include: cable management that conceals and routes cables; internal steel construction; easy-to-clean plastic exterior.
45-003-xxx 400 Series Vertical Mount Arms Part Number 45-007-xxx 45-005-xxx Description Shipping Weight Monitor Mounts Weight Capacity 45-003-099, grey 45-003-085, black Fixed, Single Pivot 28 lbs (12.7 kg) 11 lbs (5 kg) 45-007-099, grey 45-007-085, black Rotate, Double Pivot w/ P/L 23 lbs (10.4 kg) 13 lbs (5.9 kg) Keyboard/Laptop Mounts 45-006-xxx 45-005-099, grey* 45-005-085, black* Fixed, Keyboard/Laptop Pivot 7.5 lbs (3.
400 Series Horizontal Mount Arms 45-012-xxx Attach above worksurface, countertop or other horizontal surface. Part Number 45-016-xxx 45-036-xxx Description Shipping Weight Monitor Mounts Weight Capacity 45-012-099, grey 45-012-085, black Single Pivot 28 lbs (12.7 kg) 12 lbs (5.4 kg) 45-016-099, grey 45-016-085, black Double Pivot w/ P/L 23 lbs (10.4 kg) 15 lbs (6.8 kg) 7.5 lbs (3.4 kg) 13 lbs (5.
Photo Reference for 400 Series The 400 Series Arm with Keyboard/Laptop Pivot features 22 inches (559 mm) of vertical adjustability. Note the VESA FDMI monitor interface where the monitor attaches to the arm. Shown with optional Surface Clamp. A 400 Series Arm is teamed with an Extender to enhance placement capability. 400 Series Combo Arm mounted on Wall Track. 400 Series Arms shown mounted to Ergotron’s Mobile WorkStand. 400 Series Arm mounted to Ergotron TechStation. 870-03-005 rev.
Mounting Solutions Product Selection 300 Series 300 Series Mounting Solutions provide 16 to 20 inches (406 to 508 mm) of height adjustment. Extensions add telescopic motion for extension and retraction. The 300 Series features Pivot-ease® technology, which provides long-life monitor adjustment while maintaining touch-screen stability.
300 Series Pre-configurations – Vertical Mount Mount to vertical surface: directly to surface, Wall Plate, Wall Track, Pole Clamps, etc. See chart below. 45-087-xxx Part Number Description Weight Capacity Shipping Weight 45-087-180, grey 45-087-200, black Vertical Mount Arm 23 lbs (10.4 kg) 9 lbs (4.1 kg) 28-170-180, grey 28-170-200, black Vertical Mount Arm with 9" Extension 23 lbs (10.4 kg) 16 lbs (7.3 kg) 7.5 lbs (3.4 kg) 8 lbs (3.
300 Series – Individual Components 45-067-xxx Part Number 45-098-xxx 45-121-xxx Description Shipping Weight 300 Arms Weight Capacity 45-067-180, grey 45-067-200, black 300 Arm 23 lbs (10.4 kg) 8 lbs (3.6 kg) 45-098-180, grey* 45-098-200, black* 300 Arm, Keyboard/Laptop Pivot 7.5 lbs (3.4 kg) 7 lbs (3.
Photo Reference for 300 Series A 300 Series Arm with two 9" Extensions is mounted to a Command Post. This configuration can extend the keypad out over 30 inches. The top view of a cubicle where a 300 Series Arm with two 9" Extensions brings the monitor to the point of use. A 300 Series Vertical Mount Arm clamped to a 2" round pole. A 300 Series Arm with one 9" Extension attached to Wall Mount Plate. A 300 Series Arm with 9" Extension is clamped to a worksurface. Rear view of a 300 Series Arm.
Mounting Solutions Product Selection 200 Series 200 Series products feature multiple points of rotation for extension and retraction motion. This sturdy, fixed-height solution can mount multiple monitors on a single arm. Interchangeable components allow you to customize a system to your exact needs.
200 Series Pre-configurations – Vertical Mount 28-106-xxx Mount to vertical surface: directly to surface, Wall Plate, Wall Track, Pole Clamps, etc. See chart below. Part Number 28-185-xxx Description Weight Capacity per Pivot Shipping Weight 28-106-180, grey 28-106-200, black Single Pivot w/ P/L 25 lbs (11.3 kg) 4 lbs (1.8 kg) 28-185-180, grey 28-185-200, black 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 6 lbs (2.
200 Series Pre-configurations – Pole Mount Attach directly to 1-1/2" diameter poles. 28-282-xxx 28-280-xxx Part Number Description Weight Capacity per Pivot Shipping Weight 28-282-180, grey 28-282-200, black 7" Extension w/ Pole Clamp, 5" Extension, 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 14 lbs (6.3 kg) 28-280-180, grey* 28-280-200, black* 7" Extension w/ Pole Clamp, 5" Extension, Dual-Monitor 28" Crossbar, (2) Sliding Pivots See chart below 21 lbs (9.
200 Series Pre-configurations – Desk Mount 28-113-xxx 28-115-xxx 28-097-xxx Desk Mounts attach to worksurfaces with either the Desk Clamp or the Grommet Mount. Desk Clamps attach to the edge of worksurfaces ≤ 2-1/8" (54 mm) thick. Grommet Mounts attach through a hole in the worksurface 3/8" to 3" (10 to 76 mm) wide, up to 4" (102 mm) thick. Part Number Description Weight Capacity per Pivot Shipping Weight 28-113-180, grey 28-113-200, black 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 6 lbs (2.
200 Series – Individual Components (cont.) 45-120-xxx 45-136-xxx 45-137-xxx Description Shipping Weight Extensions (continued from previous page) Attaches to… 45-120-180, grey 45-120-200, black 7" Extension w/ Pole Clamp 1-1/2" Round Pole (p.44) 45-137-180, grey 45-137-200, black 7" Extension w/ Pole Clamp w/ Pivot Interface 1-1/2" Round Pole (p.44); use with Single Pivot 7 lbs (47-011-xxx), 6" Vertical Slide (60-321-009) or (3.2 kg) 100 Series Keyboard/Laptop Pivot (47-009-xxx) (p.
Photo Reference for 200 Series The 200 Series features extension and retraction motion. 200 Series Combo Arm and CPU Holder attached to Wall Track. Vertical Mount 200 Series Single Pivot w/ P/L. Vertical Mount 200 Series 6" Vertical Slide Pivot. A triple-monitor configuration attached to slatwall using a 1-1/2" Round Pole and Slatwall Pole Clamp. 200 Series Dual-Monitor with 5" Extension and 7" Extension with Pole Clamp mounted to a DS100 Pole and Desk Clamp Base. 870-03-005 rev.
Mounting Solutions Product Selection 100 Series 100 Series Mounting Solution Pivots provide tilt and portrait/landscape adjustment. Mount them to most vertical surfaces. Their low profile is perfect for space-constrained areas.
Mounting Solutions Product Selection DS400 Series DeskStand 400 (DS400 Series) is a free standing module that requires no bolting or clamping to a surface. It allows the user to easily adjust a flat panel monitor for maximum comfort and productivity. The sturdy construction is built to last, while its sleek design complements any desktop arrangement.
Mounting Solutions Product Selection DS100 Series The DeskStand 100 (DS100 Series) positions up to five monitors on one base and up to eight monitors on a two-base configuration. Choose from three base options: Free Standing, Desk Clamp, or Grommet Mount. The DS100 Series utilizes Ergotron’s patented Paraview Technology: view multiple monitors simultaneously, adjusting their position to a comfortable, ergonomically appropriate location.
DS100 Series – Pre-configurations Selections include Pivot(s), Free Standing Base, Pole and Crossbar(s) in one complete package. Standard color is black. 33-090-200 33-091-200 33-092-200 Part Number Description Weight Capacity per Pivot Shipping Weight 33-090-200, black Single Monitor Configuration: Free Standing Base, 14" Pole, Clamping Double Pivot w/ P/L 23 lbs (10.
DS100 Series – Individual Components 33-262-200 60-349-200 60-350-200 Part Number 20-161-200 Bases Description Shipping Weight Attach to… 33-262-200, black Free Standing Base No attachment necessary 2 lbs (.9 kg) 60-349-200, black Desk Clamp Base Worksurface edge ≤ 2-1/8" (54 mm) thick 5 lbs (2.3 kg) 60-350-200, black Grommet Mount Base Worksurface through hole 3/8" to 3" (10 to 76 mm) wide, up to ≤ 3-1/4" (83 mm) thick 5 lbs (2.
Photo Reference for DS100 Series Rear view of a horizontal dual-monitor DS100 configuration. Cables are routed through the crossbar. A horizontal quad-monitor configuration – two bases support four monitors across a level plane while creating a viewing parabola with Ergotron’s patented Paraview Technology. A dual-monitor vertical configuration provides full tilt adjustability. Close-up view of the Sliding Pivot on the Paraview bow.
Mounting Solutions Product Selection HD Series HD Series Mounting Solutions feature full adjustment capability; moving monitors and laptops through a 15" vertical range. The heavy-duty HD45 and HD Pivots accommodate heavier monitors than standard Mounting Solutions products. A laptop version provides a secure docking station. Attach the HD Series to virtually any vertical or horizontal surface. For HD Pivot “Range of Motion” drawings, see page 30.
Range of Motion HD Combo Dual-Monitor Arm… 35° 15" (381 mm) 90° Side View Height adjustment Side View Up/down tilt 360° 360° Top View Side-to-side 180° Front View Clock-rotation HD Combo Arm… +90°/-15° Side View Up/down tilt 90° 15" Side View Height adjustment (381 mm) 360° Top View Side-to-side Front View Portrait/landscape 360° 180° HD Laptop Arm… 35° Side View Height adjustment/tilt 360° Top View Side-to-side 180° 15" (381 mm) Attention: For HD Series dimensional information, see
HD Series – Arms (order Base separately) 44-371-xxx Select the HD45 Arm for heavy monitors. The HD Dual-Monitor and Triple-Monitor Arms hold multiple monitors. The HD Combo accommodates a single flat panel and keyboard on the same arm. The HD Combo Dual-Monitor Arm supports two flat panel monitors and a single keyboard at the same time. The HD Laptop Arm offers a secure docking station. All HD Arms are compatible with the 18" Extender (44-396-xxx) (p.29).
HD Series – Other Components for HD Arms 60-257-xxx Order a Base separately to complement your HD Arm. An optional HD Extender increases the reach of your HD Series Arms. Part Number Description Attaches to… Shipping Weight 60-257-180, grey* 60-257-200, black* Desk Clamp Horizontal surface at edge ≤ 3" (76 mm) thick 5 lbs (2.3 kg) 33-269-180, grey* 33-269-200, black* Grommet Mount Horizontal surface through hole 3/8" to 3" (10 to 76 mm) wide, up to 4" (102 mm) thick 5 lbs (2.
Range of Motion HD Pivots 180° up to 360° 180° Side View Up/down tilt Top View Left/right tilt Top View Side-to-side rotation with extension HD Series – Pivots HD Pivots provide a fixed height solution for heavy monitors. 28-274-xxx 45-142-xxx 45-143-xxx Part Number Description Weight Capacity per Pivot Shipping Weight 28-274-180, grey* 28-274-200, black* HD Pivot, Vertical Mount See chart below 3 lbs (1.
Photo Reference for HD Series The HD Combo Arm supports both a single monitor and keyboard. Inset photo shows HD Combo Arm with 18" Extender. The HD Dual-Monitor Arm mounts securely to most any desk surface with the Desk Clamp Mount. Inset photo shows the HD Dual-Monitor Arm with it’s crossbar rotated 90° to hold monitors over/under. Here, the HD45 Arm is shown vertically mounted to an Ergotron Command Post. HD Triple-Monitor Arm shown with Vertical Mount on Wall Track.
Mounting Solutions Product Selection FX Series FX Series products, FX30, FX75, and FXT75 allow a flat panel monitor or display to be mounted to a vertical surface like a picture hung on a wall. The FX75 and FXT75 can also be pole or Command Post mounted. Once installed, these modules provide a rock-solid platform, even for monitors/displays with touch-screen capability.
FX Series 100 mm 75 mm 75 mm 100 mm A two-part bracket set: To install the FX30, the user simply moves the lever to the side, lifts the monitor into place and sets it into position. The user must then engage lever into its locked position. The unique “quick-connect” design of the FX75 and FXT75 makes installation a snap. Simply hook the two plates together and “snap” the display in place.
Mounting Solutions Product Selection VL Series Vertical Lift Mounting Solutions (VL Series) are wall-mounted modules that allow quick positioning of a monitor and keyboard. When the keyboard is folded in the storage position and with the appropriate monitor selection, the total system depth can be as little as 4 inches (102 mm), making it the ideal solution for confined or high-traffic areas.
VL Series The monitor and keyboard move up and down in tandem for ease of use. An optional Slide-Out Keyboard Tray allows the user to pull out the keyboard to a more comfortable position. The system’s smooth steel construction is both durable and easy to clean. A quick-connect interface makes monitor attachment/removal easy. Part Number Description Weight Capacity** Shipping Weight 25-022-100, grey* 25-022-101, black* VL Series, VL-9 w/ Standard Keyboard Tray 9–34 lbs (4.1–15.4 kg) 34 lbs (15.
Mounting Solutions Product Selection Mobile WorkStand No matter how demanding the mobile computing application, or what type of computing equipment you need to mobilize, Ergotron has a computer cart to get the job done. The Mobile WorkStand integrates technology and convenience, allowing the user to move a computer system from room to room. It quickly adjusts to a sitting or standing user height, providing an ergonomically-correct work environment at all times.
Configure Your Own Mobile WorkStand 20-080-01 Start with the basic components below. Then add peripherals and components found below. Next, choose arms/pivots to mount your monitor, keyboard and/or laptop: 400, 300, 200 and 100 Series are compatible with Mobile WorkStand. 90-015-100 33-061 Note: When selecting arms/pivots, consult an Ergotron Representative to ensure proper configuration. Custom Pole lengths can also be ordered.
Brackets to Mount Arms & Peripherals to Mobile WorkStand For both arms/pivots and peripherals**, select the appropriate bracket listed below. Attach anywhere along the Pole. Part Number Description Application Shipping Weight 60-131-003, aluminum Pole Mount Brackets (2 Brackets) Mounts 400, 300, 200 Series and 400 Combo 2 lbs (.9 kg) 60-144-003, aluminum Pole Mount Bracket (1 Bracket) Mounts CPU Holders and Wire Storage Basket 1 lbs (.
Photo Reference for Ergotron Carts Mobile WorkStands Mobile WorkStand shown with 400 Series Monitor Arm. Mobile WorkStand shown with 100 Series Monitor Pivot. Mobile WorkStand configured with Dual-Monitors and Ergotron Power System. StyleView Cart – Flat Panel Monitor Configuration shown with Scanner Holder and Universal CPU Holder. StyleView Cart – Laptop Configuration. StyleView Cart – Flat Panel Monitor Configuration shown with Tablet PC. Mobile WorkCenter shown with 300 Series Desk Mount.
Surface Attachment Options Direct Mounting 400, 300, 200, 100, VL, HD, and FX Series Mounting Solutions can mount directly to surfaces. Since applications vary, fasteners that attach Mounting Solutions to any surface should be supplied by the user. For direct-mount hole patterns, see pp. 56–58. Always consult the appropriate construction, engineering, or architectural personnel to ensure the product is mounted securely to handle applied loads.
Wall Tracks Wall Track provides a common interface for mounting multiple Ergotron components. When mounting components to Wall Track, you must order the appropriate Track Mount Bracket Kits. Peripherals for Wall Track can be found on pages 47–48. 31-016-182 31-017-182 31-018-182 Part Number Description Dimensions HxW Shipping Weight 31-016-182, silver 10" Wall Track 10" x 5" (254 x 127 mm) 2 lbs (.9 kg) 31-017-182, silver 26" Wall Track 26" x 5" (660 x 127 mm) 4 lbs (1.
Command Posts Command Post gives you the flexibility to mount one or more computer systems to a floor, bench, machine or ceiling – using little or no floor space. It is constructed from heavy-duty 11-gauge steel for long-lasting durability. Brackets are required to mount Mounting Solutions and peripherals to the Command Post. A Bracket Interface, which adapts the component to the standard bracket, is also required for the Vertical Lift and the Cable Box.
Mounting Options and Uses Table Post Dimensions Base/Bracket Floor/Ceiling Wall/Bench/Machine Part Number HxWxD Part Number allowable configuration allowable configuration 20-142-100 48" x 2" x 2" 60-359-100/97-012-100 Arm, no Extender Arm w/ Extender 20-143-100 72" x 2" x 2" 60-359-100/97-012-100 Arm, no Extender Arm w/ Extender 20-075-100 48" x 3" x 3" 60-360-100/97-011-100 Arm(s) w/ Extender Arm(s) w/ Extender 20-076-100 80" x 3" x 3" 60-360-100/97-011-100 Arm(s) w/ Extender
Pole Mounts Attach equipment to 2", 1-3/4" or 1-1/2" Round Poles. Use your own pole or choose from the selection below. 60-131-003 Part Number Description Shipping Weight 2" Pole-Mount Brackets 60-144-003 60-199-003 Application 60-131-003, aluminum Pole-Mount Brackets (2 Brackets) 200, 300, 400 Series, HD Series Pivots, Extenders, FX75 and FXT75 on vertical 2" Round Pole 2 lbs (.9 kg) 60-144-003, aluminum Pole-Mount Bracket CPU Holders, Wire Storage Basket on vertical 2" Round Pole 1 lbs (.
Slatwall Components Slatwall Brackets attach 400, 300, 200 and 100 Series Mounting Solutions to slatwall. Slatwall Pole Clamps support a 1-1/2" Round Pole, to which arms may be mounted. Order according to slatwall manufacturers. Standard color is black. Part Number Description Shipping Weight 60-271-009, black Woodtronics, Knoll, Infra-structure, Evans, Eurocraft, Teknion, Steelcase, EDP, CBA 2 lbs (.9 kg) 60-272-009, black Novalink 2 lbs (.
Accessory Selections Keyboard/Mouse Trays, Laptop Trays & Accessories Part Number Description Dimensions WxDxH Shipping Weight 77-049-180, grey 77-049-200, black Keyboard Tray 16-1/2" x 7-1/4" x 2" (419 x 184 x 51 mm) 3 lbs (1.4 kg) 77-050-180, grey 77-050-200, black Keyboard Tray w/ Sliding Mouse Tray and Wrist Rest Holder 17-1/2" x 9 to 12" x 2-1/2" (445 x 229 to 305 x 64 mm) 7 lbs (3.
Monitor Interface Accessories 60-244-007 97-197-200, converts 200x100 mm monitors into 75x75 mm or 100x100 mm VESA hole patterns Attach your monitor to Ergotron Mounting Solutions with the Quick Mounting Kit – no tools necessary. The Quick Release Kit makes removal and reattachment of your monitor fast and easy. The Tamper Resistant Kit secures the lever of the Quick Release Kit.
Storage Components The CPU Cabinet is vented and lockable. The Wire Storage Basket and Cable Box add extra storage options to a configuration. 99-068-100 Part Number Description Dimensions HxWxD Shipping Weight 99-068-100, grey* Wire Storage Basket 6-1/8" x 13-1/8" x 4-1/8" (156 x 333 x 105 mm) 3 lbs (1.4 kg) 80-062-100, grey** CPU Cabinet 18-3/8" x 21" x 8" (467 x 533 x 203 mm) 34 lbs (15.
Monitor Interface & VESA® Standard Guide VESA® FDMI™ Standard The VESA® FDMI™ Standard* defines mounting interfaces, hole patterns, and associated cable/power supply locations for LCD monitors, plasma displays and other flat panel devices. Ergotron Flat Panel Mounting Solutions are designed to fit this standard to make monitor attachment quick and easy. Oftentimes a monitor’s hole pattern is revealed by removing its base (refer to your monitor’s manual for details).
Ergonomics Data & Mounting Heights Ergonomic Ground Rules – English Units To obtain optimum performance from a workstation, consider the following topics during installation of your Flat Panel Mounting Solutions: • The adjustment range of the Mounting Solutions product.
Ergonomics Data & Mounting Heights Ergonomic Ground Rules – Metric Units To obtain optimum performance from a workstation, consider the following topics during installation of your Flat Panel Mounting Solutions: • The adjustment range of the Mounting Solutions product.
Mounting Height Illustrations Numbers in the diagrams below can be cross-referenced with numbers in the Eye-Height / Elbow-Height Tables on the preceding pages. For more detailed information, consult our Ergonomic Mounting Heights Guide, literature #888-99-014, which is included with each Mounting Solutions purchase.
Mounting Height Illustrations Numbers in the diagrams below can be cross-referenced with numbers in the Eye-Height / Elbow-Height Tables on the preceding pages. For more detailed information, consult our Ergonomic Mounting Heights Guide, literature # 888-99-014, which is included with each Mounting Solutions purchase.
Technical Specifications Weight Capacity Weight capacities for Mounting Solution products should be regarded as general guidelines only. Several variables can effect weight capacity, so capacity may vary between applications. Where weight range is shown (e.g. 5–30 lbs), the lower end of the range represents minimum weight required for proper function. 400 Series* • Single Pivot: 28 lbs (12.7 kg) • Double Pivot w/ P/L: 23 lbs (10.4 kg) • Keyboard/Laptop Pivot: 7.5 lbs (3.
Technical Specifications Weight Capacity Weight capacities for Mounting Solution products should be regarded as general guidelines only. Several variables can effect weight capacity, so capacity may vary between applications. Where weight range is shown (e.g. 5–30 lbs), the lower end of the range represents minimum weight required for proper function. FX Series • FX30: 30 lbs (13.6 kg) • FX75: 75 lbs (34 kg) • FXT75: 30–75 lbs (13.6–34 kg), see TABLE C VL Series • VL-9: 9–34 lbs (4.1–15.
Interface Dimensions Surface construction varies. It is recommended that you consult the appropriate architectural, for Direct Mounting Note: engineering or construction personnel to ensure Mounting Solutions are properly mounted to handle the applied loads. 400 SERIES Horizontal Mount Surface/ Suspend Arm Interface Extender Hole Pattern 5" 1.125" (127 mm) (28.6 mm) 2.75" (69.9 mm) 1.38" (35.1 mm) 5.035" 2.75" Ø .19" (128 mm) (69.9 mm) (4.8mm) .282" x .282" 2.02" (7.2 x 7.2 mm) Ø .
Interface Dimensions Surface construction varies. It is recommended that you consult the appropriate architectural, for Direct Mounting Note: engineering or construction personnel to ensure Mounting Solutions are properly mounted to handle the applied loads. 100 SERIES Single Pivot & Single Pivot w/ P/L Interface Double Pivot & Double Pivot w/ P/L Interface ø .188" ø .188" (4.8 mm) (4.8 mm) Slotted 1.735" 1.063" 1.75" 1.063" (44.1 mm) (27 mm) (44.5 mm) (27 mm) 1.063" 1.
Interface Dimensions Surface construction varies. It is recommended that you consult the appropriate architectural, for Direct Mounting Note: engineering or construction personnel to ensure Mounting Solutions are properly mounted to handle the applied loads. HD SERIES VL SERIES Vertical Mount Hole Pattern Vertical Lift Hole Pattern Extender Hole Pattern 2.62" 2.38" (60.5 mm) 12" (66.5 mm) .67" ø .42" (305 mm) (10.7 mm) (17 mm) 2.5" (63.5 mm) 5.04" 3.54" (128 mm) (89.9 mm) (22.
Product Dimensions 400 SERIES Vertical Mount Monitor Arms Vertical Mount Combo Arms 14-1/4" 18-7/8" (362 mm) (479 mm) 6-5/8" 45-032-xxx Side View (168 mm) 45-003-xxx Maximum Extension (Left) Fully Folded Back (Right) 45-007-xxx 14-7/8" (378 mm) Vertical Mount Keyboard/Laptop Arms 14-5/8" (371 mm) 45-005-xxx 16-3/8" (416 mm) 4-3/4" 14-5/8" (121 mm) (371 mm) 45-006-xxx 8-3/8" 45-029-xxx Side View (213 mm) Horizontal Mount Monitor Arms Maximum Extension (Left) Fully Folded Back (Right)
Product Dimensions 300 SERIES Vertical Mount Monitor Arm 10-3/8" (95 mm) (229 mm) (108 mm) 3-3/8" (229 mm) 1-7/8" 10-3/8" 9" 4-1/4" (264 mm) 9" 45-087-xxx (86 mm) (48 mm) (264 mm) 1-7/8" Extensions Miscellaneous Configurations 3-3/4" 1-7/8" (48 mm) 45-056-xxx 8" (48 mm) 203 mm 5" 4-1/2" 25-1/2" (114 mm) 6" (648 mm) (413 mm) 10-3/8" (264 mm) 9" 4-1/4" (86 mm) 45-121-xxx (108 mm) 7-1/4" (229 mm) 9" 3-3/8" (152 mm) 16-1/4" (184 mm) (229 mm) 1-7/8" (127 mm) (48 m
Product Dimensions 200 SERIES 25" 3-1/4" (635 mm) Vertical Mount Monitor Arms 9" 9" (229 mm) (229 mm) (83 mm) Extensions 9" 1-7/8" 6-1/8" (229 mm) (48 mm) 3-3/8" 11-1/2" (156 mm) 28-106-xxx (86 mm) (292 mm) 28-096-xxx 5-1/2" 45-056-xxx (140 mm) 2-3/4" (70 mm) 5" 21-3/4" (552 mm) 9" 9" (229 mm) (229 mm) 3-1/2" 6-3/4" (89 mm) (171 mm) (127 mm) 3-3/8" (86 mm) 6" 45-121-xxx (152 mm) 17" (max.
Product Dimensions 100 SERIES Monitor Mount Pivots Keyboard/Laptop Mount Pivot 2-3/8" 3-3/8" 4-5/8" 5-3/8" (60 mm) (86 mm) (117 mm) (137 mm) 2-3/4" (70 mm) 2" 2" 2" 2" 2" (51 mm) (51 mm) (51 mm) (51 mm) (51 mm) 47-001-xxx 47-011-xxx 47-012-xxx 47-007-xxx 47-094-800 3" (76 mm) FX SERIES FX30 Wall Bracket & Monitor Bracket FX75 & FXT75 Anchor Bracket 60-239-007 60-494-200 & 60-521-200 ø .221" 3.94" (5.61 mm) (100 mm) 9.68" ø .203" 2.95" (246 mm) (5.
Product Dimensions DS100 SERIES X Pivots 1-1/2" Desk Clamp Base (38 mm) 5-5/8" 60-349-200 47-057-200 Single Pivot; X = 2-3/4" (70 mm) 47-058-200 Single Pivot with P/L; X = 3-5/8" (92 mm) (143 mm) 1-3/8" 14-1/4" to 36-1/4" (35 mm) 47-050-200 (362 to 921 mm) Double Pivot; X = 5-1/8" (130 mm) 2" 3" (51 mm) (76 mm) 5-5/8" (143 mm) 47-051-200 Double Pivot with P/L; X = 6" (152 mm) 3" (76 mm) 12-3/8" 12" (314 mm) 12-3/8" (305 mm) (314 mm) Crossbars 28" 46" 55" (711 mm) (1168 mm)
Product Dimensions HD SERIES – ARMS HD Arms - HD45 Arm (44-371-xxx) HD Extender (44-396-xxx) 17-3/4" (451 mm) 8-3/8" 2" 16-1/8" (51 mm) (410 mm) (213 mm) 6-3/8" 13-3/4" 21-7/8" (162 mm) (349 mm) (556 mm) 17-1/2" 19" (445 mm) (483 mm) HD Arms - HD Dual-Monitor Arm (28-275-xxx) 9-1/2" (241 mm) 11-1/2" (292 mm) 25" 28" (711 mm) (635 mm) 20-1/2" 23" (521 mm) (584 mm) HD Arms - HD Triple-Monitor Arm (28-276-xxx) 10-3/4" (273 mm) 11-1/2" (292 mm) 46-1/8" (1172 mm) 30-5/8" (778 mm)
Product Dimensions HD SERIES – ARMS (continued) & PIVOTS HD Arms - HD Laptop Arm (44-389-xxx) Maximum Laptop Size 1" 23" (584 mm) (25 mm) 37" (940 mm) 22" (584 mm) (305 mm) Viewable Area 12-1/2" (318 mm) Screen Height 14" (356 mm) 12-1/4" 12" 23" (559 mm) 12-3/4" (311 mm) (324 mm) 1-1/2" (38 mm) 28-1/2" (724 mm) 13-1/2" 10" (343 mm) (254 mm) 13-1/4" (337 mm) 27" (686 mm) HD Pivots 14-3/8" 4-1/8" 10-3/8" (365 mm) (105 mm) (264 mm) 4-1/8" (105 mm) 11-7/8" 4-5/8" (302 mm) (11
Sample Configurations Configure your own system with Ergotron’s modular components. Examples listed here are some configuration ideas. A.
C. Mobile WorkStand configuration: 1 33-061, Base & Casters 2 20-080, 2" Round Pole 3 90-015-100, Handle 4 45-003-099, 400 Series Arm, Vertical Mount, Fixed, Single Pivot (top) & 45-005-099, 400 Series Arm, Vertical Mount, Fixed, Keyboard/Laptop Pivot (bottom) 5 70-054-100, Cable Box 6 80-063-100, CPU Holder – Small 7 85-022, Footrest 8 99-140, Stabilizer Weight (25 lbs) 9 99-033-078, Mouse Pouch C. 3 4 6 2 9 5 7 8 1 5 D.
International Notes 1. Product part numbers found in this document that begin with "28-" may not be available in Europe. Please contact the office to determine availability and shipment time-frames: Ergotron Europe, Hogehilweg 8 1101 CC Amsterdam ZO The Netherlands Phone: 31 20 312 29 39 Fax: 31 20 312 29 40 E-mail: info.eu@ergotron.com 2.
Notes For a more comprehensive set of configurations for specific market environments, please see the following Orderguides: • Healthcare Markets, see our Healthcare Orderguide (870-03-022) • Dental Markets, see our Dental Orderguide (870-03-021) • Financial Markets, see our Financial Orderguide (870-03-023) There are many Flat Panel Mounting Solution configurations found in these separate Orderguides that cannot be found here. All of Ergotron’s literature may be found on our website, www.ergotron.com.
Notes 70 • Flat Panel Mounting Solutions Orderguide • rev.
Notes 870-03-005 rev.
Maximize the effectiveness of your computer systems with Ergotron Products. ince 1982, Ergotron has designed and engineered products specifically for improving the human interface with computers. Innovative engineering concepts incorporate the human factor into each and every product. With our patented Monitor Suspension technology as the core, Ergotron designs Mounting Solutions that consistently meet the ever changing needs of our customers.