Datasheet

870-03-020 rev. 01/06/04 • TechStation Orderguide • 13
Worksurface Mounts: Two worksurface attachment options are available: the Desk
Clamp and the Grommet Mount. The Grommet Mount allows placement at any point
on the worksurface where a hole 3/8" to 3" wide is drilled.
Part Description Mounts to...
Number
60-257-100 Desk Clamp Worksurface edge ≤3" (76 mm) thick
33-269-100 Grommet Mount Worksurface through hole
3/8"–3" (10 - 76 mm) wide, ≤4" (102 mm) thick
Monitor Mounting Solutions
42-020-100
Suspension Truck
Mount a CRT monitor below a Suspension Shelf or Security Cabinet with a Suspension
Arm or Truck. Both slide across a shelf’s/cabinet’s underside track and provide monitor
tilt and rotation. Arms also add 6" of height adjustment.
Part Description Horizontal Length Weight
Number (Pivot-point to pivot-point) Capacity
44-322-100 "A" Suspension Arm 13" (330 mm) 15–35 lbs (4.5–16 kg)
44-323-100 "B" Suspension Arm 13" (330 mm) 35–65 lbs (16–30 kg)
44-324-100 "C" Suspension Arm 13" (330 mm) 65–100 lbs (30–45 kg)
42-020-100 Suspension Truck ≤100 lbs (≤ 45.5 kg)
Tilt / rotate adjustment: 20° / 360° Vertical adjustment: 6" (152 mm)
Suspension
Arm
Order a Caddy along with a Suspension Arm or Truck. Choose a Caddy based on the
size and weight of the monitor it will hold.
Part Description Height Monitor Mon i tor Monitor
Number Adjustment Depth* Width* Weight*
40-002-100 Type 2 12"–15-1/2" 16-1/2" — 40 Ibs
Monitor Caddy (305–394 mm) (419 mm) — (18 kg)
40-004-100 Type 3 13-1/2"–18-1/2" 19" — 65 lbs
Monitor Caddy (343–470 mm) (483 mm) — (30 kg)
40-008-100 Type 4 16-1/2"–22" 22" — 70 lbs
Monitor Caddy (419–559 mm) (559 mm) — (32 kg)
40-013-100 Type 5 16-1/2"–22" — 16-1/4"** 120 lbs
Monitor Caddy (419–559 mm) — (413 mm) (54 kg)
* Monitor depth, width and weight specifi cations are all listed as maximum measurements.
** For wide-backed monitors; maximum rear monitor width is 16-1/4", measured 15" from front of monitor.
40-002-100
Type 2 Monitor
Caddies
The versatile 10" Lift Arm can attach to the worksurface or the DuraFrame. It features
10" height adjustment and 2-point, 360˚ rotation. A Monitor Platform with clips is
included to hold a CRT in place.
Part Description Attaches to... Weight
Number Capacity
44-343-100 10" Lift Arm 20–60 lbs (9.1–27.2 kg)
75-064-009 Wire Keyboard Holder, 10" Lift Arm under platform
2" Drop
75-065-009 Wire Keyboard Holder, 10" Lift Arm under platform
4" Drop
44-343-100
10" Lift Arm
60-257-100
Desk Clamp
Frame Mounts: To attach to the DuraFrame, order both a Vertical Mount and an Arm
Mount Kit.
Part Description Mounts to...
Number
60-378-100 Vertical Mount Arm Mount Kit Brackets (see below)
60-231-100 Arm Mount Kit Front of DuraFrame
60-230-100 Arm Mount Kit Inside of DuraFrame
75-064-009
Wire Keyboard Holder
60-231-100
Arm Mount Kit at
Front of DuraFrame
CRT Under-Shelf Mounts
CRT Lift Arm
60-378-100
Vertical Mount for
10" Lift Arm - requires
Arm Mount Kit to attach
to DuraFrame
33-269-100
Grommet Mount
Frame Mounts
Worksurface Mounts