User Manual

888-45-298-W-02 rev.G • 01/15
14 of 14
f
© 2015 Ergotron, Inc.
4 mm
1
2
3
ENGLISH
Loosen these two screws.
Loosen or tighten this bolt to adjust tilt to desired angle.
Tighten to tilt up.
Loosen to tilt down.
After desired tilt is achieved, retighten these
two screws to secure.
WARNING!
Screws must be tightened to keep product secure.
Failure to follow these instructions will create an
unstable situation and may result in equipment
damage or personal injury.
Angle Setting Adjustment