User`s guide

888-47-019-02 rev. N • 03/09
5 of 8
6
Side-to-Side Motion
Move monitor side-to-side through entire range of motion. If it does not stay
in place at any point it will need adjustment - see below. Adjust so side-to-side
moving forces are equal.
Adjust Side-to-Side
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
5
Tilt Motion
Tilt monitor up and down through entire pivot range of motion. If it does not stay in place or
movement in one direction is stiff, pivot needs adjustment - see below. Adjust until monitor
stays in place and tilting forces, up or down, are equal.
Adjust Tilt
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
1/2"
1/2"
1/2"
1/2"