Use and Care Manual

Functional specifications
Product overview:
The motor controller used in single lift table system. It suits ordinary 2 “︿﹀”
control panel and LED display with 4 independent memories control panel.
Supporting rise and fall slowly and anti-pinch function.
Control panel specifications:
Keys Description:
UP “︿”button : used for table lifting up and second function setting
DOWN “﹀”button : used for table lifting down and second function setting
Memory “1” button : memory Settings and memory the height in button 1
Memory “2” button : memory Settings and memory the height in button 2
Memory “3” button: memory Settings and memory the height in button 3
Memory “4” button: memory Settings and memory the height in button 4
“M” button : setting the memory function and second function setting
Height memory Setting:
1. , press the key combination ( M + memory button X),
the LED display will flash 2 times. It means you have memorized the current
height successfully .
2. Short pressing the memory button X to check the height of memory.
3. Long pressing the memory button X , then the table lift to memorized height,
table stop when loosen the button.
4. Double click on the memory button X , the table lift to memorized height
automatically. Press the "up or down keys" stop immediately.
PS: Memory button X is any key from 1-4.
Lift to desired height