| Preface This manual height adjustable standing desk consists of & heavy-duty steel desk frame, and & manta height adjustment system, Please read and understand this manual before installation in order to make sure the safe and correct uge of the system and maintain the longevity of the overall construction.
Other Safety Instructions: = Clear g all obstacles within the. hellcat adjustment range, s Don't leave the cords or plug unorganized it order to prevent tripping hazards. = fin attempts to reconstruct the desk frame aren't allowed, » Don't add anything to the-adjustable junctions of the desk frame. = Outdoor use is prohibited.
| Preparation e What are the specifications you need o know? @ What are the tools you require while installation? Weight Capacity 70kg (1541ps) Operation Temperature Allen Wrench {Included) 8 Phillips screwdriver Bubble Level @ What's the thing you'd better have before installation? A Shipping Blanket to protect the desiccate and the floor e Things vou need to know before installation Please check all of the Components shi Orig the compo are (dissing or damaged, contact Our net checklist.
T Thee e any _smfim__mmo: D (x2) g E (x1) Drive Rod Module (x1) Lifting Concurring page can e torn §b that it's easier for you to humiliate the components with the images.
I Assembling the Frame Shipping Blanket Ellen Wrench + Please prepare o spacious ares for initialization; ane pita shipping blanket i the area to prevent scratches on the floor and the frame + Loosen the hex head sowers that fix the adjustable unction, but font completely take Sut the screws: Note: The drawings of the crossbar are the backside of the components. Please make sure the crossbar keep facing down while installation, whit iz convenient for the further steps.
| Installing the Side Brackets + Attach the side brackets (B to the end of the crossbar using the 2 screws Y a5 shown with the Allen wrench. % « Repeat theses process 1o assemble the other side bracket.
After tightening the screws, tse a dri make mounting holes on the back: tabletop through the 8 miscounting hales the side brackets. Note: The depth of the miscounts shawls Be over 10mim and the should be less than Zmm.
I Installing the Feet “ = Place the foot on the bottom of the lifting column, Align the mounting holes on the foot with the screw holes on the lifting column.
I Installing the Desktop « align the previously drilled screw oy the crossbar. Insert and Heighten the 03 th the mounting hots on crews ERB from below.
I Low Profile Adjustment «Ult the handle outward first ts ad + There are two adjustable foot pads ind; even foot. if the floor isn't even, simply turn the pad to adjust: the height ¢, make the desk stable.
