System Manual
Table Of Contents
- Contents
- 1 General Notes
- 2 Definitions
- 3 Components
- 4 Start-up and Preparation
- 5 Attaching the ECG System to the Patient
- 6 Cleaning and Disinfection Instructions
- 7 Maintenance Information
- 8 Disposal
- 9 Technical Specifications
- 10 Electromagnetic Compatibility (EMC) DIN EN 60601-1-2
5 Attaching the ECG System to the Patient
38 |
38
201000401000 / Rev 04
5.3.4 Removing the Adapter with the 1-Channel Transmitter from the Patient
• Carefully disconnect the leadwires from the ECG electrodes.
• Remove the adapter with the 1-channel transmitter from the patient.
• Carefully remove the ECG electrodes from the patient following the manufacturer's instructions.
• Remove the 1-channel transmitter from the adapter by holding the adapter with one hand and
the 1-channel transmitter with the other hand and detaching it horizontally from the snap
fasteners integrated in the cradle.