User's Manual

8-1

BODY ASSEMBLY/CANOPY ATTACHMENT

8-2

BODY ATTACHMENT

..........5 pc

2.3x8mm Self Tapping Screw

*After trimming, attach the canopy to the body

temporarily with tape. Next drill five 1/16" holes

through both the canopy and the body and

secure using the 2.3x8mm screws provided.

Note: It will be necessary to trim

away the unwanted plastic

off the canopy and side

window areas using an

X-Acto knife.

Slide the completed body over the mechanics and secure

through the four canopy mount standoffs as shown.

Check to insure that the body does not come contact with any portion of the

Main Frame, Muffler, Servo/Servo Horns, etc. Trim for clearance if necessary.

Body

Drill four 15/64" holes and

insert Rubber Grommets

as shown.

2.3x8mm Self

Tapping Screw

(5 pc)

*Canopy (Trim prior to attachment)

Rubber Grommets (4 pc)