User's Manual

6-3
TAIL CONTROL ROD ASSEMBLY
6-4
TAIL CONTROL ROD INSTALLATION
34
Insert the Tail Control Rod Assembly into the
four guides through the inner holes. Adjust
the spacing of the guides as shown below
and secure using the four 2x8mm Self
Tapping Screws as shown.
Note: Be sure to use the inside hole of
the Tail Control Rod Guide during
assembly.
2x8mm Self Tapping Screw
......4 pc
Universal Link (2 pc)
Tail Control Rod Bushings (5 pc)
Tail Control Rod
Thread Link
8mm onto
Control Rod
Thread Link 8mm onto Control Rod
Tail Contol Rod Guide (4 pc)
2x8mm Self Tapping Screw
Tail Control Rod Clip
located on Main Fram
140mm 140mm 140mm
140mm
Tail Control Rod Bushing
......5 pc
Universal Link
......2 pc