Motorized Toy Car User Manual

4-7

FLYBAR INSTALLATION

4-8

FLYBAR PADDLE ATTACHMENT

3mm Lock Nut

........2 pc

4x4mm Set Screw

........2 pc

* Be sure to insert Flybar Bushings into

the Seesaw Shaft before inserting Flybar.

Check to insure that the two Flybar

Control Arms are parallel to the

center line of the Flybar.

Note: Center the Flybar in the Seesaw Shaft before securing the two Flybar Control Arms.

Thread each Flybar Paddle onto the Flybar until the

threaded tip of the Flybar protrudes approximately 4mm.

Adjust each Flybar Paddle so they are parallel to the

Flybar Control Arms, and to each other. Secure to the

Flybar using two 3mm Lock Nuts.

Note proper direction of each Flybar Paddle

(short portion forward, clockwise rotation).

*Flybar Bushings (2 pc)

Flybar Control Arm (2 pc)

4x4mm Set Screw

(2 pc)

Flybar

Flybar Centering

Center Line

3mm Lock Nut (2 pc)

Flybar Paddle (2 pc)

Use Threadlock