Datasheet

4253e/LK/28.11.2016
TECHNICAL DATA SHEET ergo.
®
4253
Universal Instant Gasket
Physical Properties (liquid product)
Chemical Base: Diester of Methacrylic Acid
Colour: orange/ fluorescent
Viscosity at 25°C, Brookfield RVT
100.000 – 180.000 mPas spindle 6, 2,5 rpm
30.000 – 40.000 mPas spindle 6, 20 rpm
Density at 25°C: 1.05 g/cm³
Max. thread diameter: N/A
Max. gap filling: 0.50 mm
Flash point: > 100°C
Shelf life: 1 year at room temperature
Physical Properties (cured product)
Measured on M10 x 20 bolt - grade 8.8 black phosphatized - nut 0.8d (no on-torque)
Initial strength after: 10 - 20 minutes
Functional strength after: 3 - 6 hours
Final strength after: 6 - 24 hours
Loose-break torque: > 8 Nm DIN 54454
Prevailing torque: > 10 Nm
Shear strength: 5 - 10 N/mm² DIN 54452
Tensile strength: 8 - 10 N/mm² ASTM D-2095
Impact strength: 5 – 10 Nmm/mm² ASTM-D-950
Thermal range: - 55°C up to +150°C
WARRANTY INFORMATION - PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of
use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that KISLING
products are safe, effective, and fully satisfactory for the intended end use. KISLING sole warranty is that the product will meet the
KISLING sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of
purchase price or replacement of any product shown to be other than as warranted. KISLING specifically disclaims any other express or
implied warranty of fitness for a particular purpose or merchantability. Unless KISLING provides you with a specific, duly signed
endorsement of fitness for use, KISLING disclaims liability for any incidental or consequential damages. Suggestions of uses should not be
taken as inducements to infringe any particular patent.
Description
Medium strength product, which seals flanges as well as other flat surfaces against a
wide range of gases and chemicals. It replaces common solid sealing compounds
like cork, paper, rubber or metal. Easy to apply by using foam-rollers or screen-
printing systems. Certified acc. to NSF ANSI 61 for use in commercial and residential
potable water systems not exceeding 82° C. NSF P1 listed for use in food processing
areas.
Note: This is a regional approval. Please contact us for more information and clarification.