Datasheet

LK/ 14.12.2007/ 4202e
TECHNICAL DATA SHEET ergo 4202
Hydraulic Sealant
Description
Medium strength product which seals cylindrical and conical threaded connectors up to ¾ inch
against pressure as high as the burst pressure. Excellent resistant against industrial hydraulic
liquids and lubricants.
Physical Properties (liquid product)
Chemical Base: Diester of Methacrylic Acid
Colour: brown/ fluorescent
Viscosity: 25°C Brookfield RVT
450 – 700 mPas spindle/ rpm 2/ 20
Density: 1.05 g/cm³ 25°C
Max. thread diameter: ¾ inch
Max. gap filling: 0.15 mm
Flash point: > 100°C
Shelf life: 1 year at room temperature
Physical Properties (cured product)
Measured on M10 x 20 bolt - grade 8.8 zinc galvanised - nut 0.8d (no on-torque)
Initial strength after: 10 - 20 minutes
Functional strength after: 1 - 3 hours
Final strength after: 3 - 6 hours
Loose-break torque: 14 - 20 Nm (M10) DIN 54454
Prevailing torque: 16 - 22 Nm (M10)
Shear strength: 8 - 16 N/mm² DIN 54452
Thermal range: - 55°C up to +150°C
Attention:
The use of ergo® 4202 is not recommended for threads, cut in copper or copper alloys,
which have contact with hot water (>40°C), without any prilaminary testing.
WARRANTY INFORMATION - PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of
our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that KISLING products are
safe, effective, and fully satisfactory for the intended end use. KISLING sole warranty is that the product will meet the KISLING sales
specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or
replacement of any product shown to be other than as warranted. KISLING specifically disclaims any other express or implied warranty of fitness
for a particular purpose or merchantability. Unless KISLING provides you with a specific, duly signed endorsement of fitness for use, KISLING
disclaims liability for any incidental or consequential damages. Suggestions of uses should not be taken as inducements to infringe any
particular patent.