Autopetfeeder Manual

Check the arrow marks on the Feeder base and the

Feeder container lines up together as shown in Fig 4.

Make sure that the safety pin aligns with the safety

switch receiver as shown in Fig 5.

Make sure that the safety switch pin at

the bottom of the container interlocks

with the safety switch pin receiver hole

on the base. This safety feature ensures

that the feeder can operate only if the

storage container is installed properly.

Step 7

Fig 4

Fig 5

Then the bottle is pressed into the base as shown.

Step 9

Fig 7

Replace the food container cover.

Step 10

Fig 8

Step 8

For replacing the bowl refer to Page No.4. (Step 1.2, 1.3 & 1.4)

Connect timer and power outlet and start feeding your loved ones with your clean Feeder.