Autopetfeeder Manual

Unscrew the food container cover as shown in Fig 2.

Holding the feeder base tightly between your feet

pull up the food container as shown in Fig 3.

Step 3

Fig 3

Maintenance

Step 1

Step 2

Your Autopetfeeder is easy to dismantle, clean and to assemble. Always disconnect feeder from 110VAC prior to

cleaning. Do not under any circumstances wash down this feeder, serious injury could occur if the applicance is

connected to 110 VAC. Below steps will make your cleaning process easier.

First disconnect the feeder bowl as shown in Fig 1.

Clean the inner area of the storage container.

Step 4

Clean the Bowl and Lid.

Clean the Base.

Step 5

Step 6

Cleaning of Autopetfeeder is completed.

Follow the below steps to reassemble your feeder.

Fig 2

Fig 1