Owner`s manual

Fig 2

Assembly

Step 1

Fig 1

Step 2

Fig 3

The 8-Day Autopetfeeder comes as a pre-assembled unit.

Now the digital timer needs to be programmed for the unit to work automatically. Follow the steps below to program the timer.

Remove the sticker from the Bowl Cover Handle.

Remove the three screws to remove the Bowl Cover Handle.

Align the bowl to the cover and tighten the screws. Replace

the sticker.

Bowl Cover Alignment

Check to see if the bowl cover aligns with the feed bowl. If the

alignment is correct go to Step 3. If the alignment is off proceed to Step 1.