User guide

EG_GenPro2xe_1003_UG_005_UK Page 24 / 63
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
5.1.4 SIM card Extraction
To remove the SIM card from the modem, it is recommended to do the following operations with the modem
turned off:
- Remove the SIM card cover on the rear side.
- Press the SIM card (simple pressure) until hearing a "clic" that ensures its ejection.
- Remove delicately the SIM card from the reader.
- Put the SIM cover back.
5.1.5 Hardware reset of the modem
To trigger a Hardware reset of the modem, a RESET signal (hardware) is available on the pin 14 of the 15-
pin Sub HD connector (RESET).
The modem Reset is made when the RESET signal (pin 14) is held at a low level during 10ms.
This signal must be considered as a way of reseting the modem in case of emergency only.
For more details concerning the modem RESET, see the paragraph 7.6 RESET