User guide
Table Of Contents
- Presentation
- Warning
- Copyright
- 1 References
- 2 Packaging
- 3 General presentation
- 4 Characteristics and Services
- 5 Use of the modem
- 5.1 Starting with the modem
- 5.2 Specific recommendations for the use of the modem in vehicles
- 5.3 GSM led of the modem
- 5.4 Echo function of AT commands deactivated
- 5.5 Checking the quality of the GSM reception signal
- 5.6 Verification of PIN code
- 5.7 Verification of modem registration on GSM network
- 5.8 Verification of modem registration on GPRS network
- 5.9 Verification of internal voltages of the modem
- 5.10 Main AT commands (HAYES)
- 5.11 Turning OFF the modem
- 5.12 Updating procedure of the modem
- 6 Trouble Shooting
- 7 Functional description
- 8 Technical characteristics
- 8.1 Mechanical characteristics
- 8.2 Electrical characteristics
- 8.3 Environmental characteristics
- 8.4 Standards/Conformities
- 9 Security recommendations
- 10 Recommended accessories
- 11 Client support
EG_GenPro25e_1055_UG_000_UK Page 19 / 66
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO & GENER reserves the right to make any modification.
Dct_427_01
3.2.2 Cables
3.2.2.1 4-wire micro FIT cable
The 4-wire micro FIT cable is used to supply power to the modem and to use the 2 signals Input and Output.
Figure 8 : 4-wire Micro FIT cable
Figure 9 : 4-wire Micro FIT cable connector
Vue from pin side
Table 4 : Characteristics of the 4-wire Micro FIT cable
Component Characteristics
4-pin Micro FIT connector Supplier : MOLEX
Cable Length 1.5m
Wire Tinned copper 24 x 0.2 mm
Section : 0.75 mm²
Fuse mini N 2A 32V RAPIDE (Grey)
Reference of fuse: Mini Blade for vehicle 2A - 32V (color code: grey)