User guide

EG_GenPro30e_1006_UG_002_UK Page 17 / 37
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
5.1.4 Verification of the communication with the modem
Once the driver is correctly installed, it is possible to dialog with the GenPro 30e and to use the GenPro 30e
modem with a terminal.
At this moment, you must absolutely know the virtual USB port that was attributed to it.
For that, go to the Windows configuration board.
Choose "Performances and maintenance"
Select "System"