User guide

EG_GenPro30e_1006_UG_002_UK Page 16 / 37
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Uninstalling all the GenPro 30e drivers previously installed as well as 3G Display and restarting the
PC may be necessary for a new installation of new 3G Display drivers (due to the evolution of the
module heart used in the GenPro 30e).
It is preferable to wait for the complete starting of your PC before powering the GenPro 30e and
connecting it to the USB port.
Depending on the installations of USB drivers already made on your computer, the installation of the USB
Driver for the GenPro 30e will not be automatic and necessary.
1- For the installation, download and extract the files that contain the Drivers in a directory on the root
of the PC hard disk (example: C:\Drivers_GenPro_30e).
2- In the directory : C:\...\Drivers_GenPro_30e\DriverInstaller, run the file DriverInstaller.exe
The following window will appear and show the progressing state of the pilots installation:
3- Once the installation is made, do the following operations in the right order :
- For the connection to the DTE (PC), connect the USB cable.
- Connect the DC regulated external power source to the GenPro 30e.
WARNING
: If the following window appears, cancel it and check that you have done correctly the operations
1 and 2.