User guide
EG_GenPro30e_1006_UG_002_UK Page 13 / 37
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
3.2.2 Cables supplied
3.2.2.1 Micro FIT 2-wire supply cable
The 2-wire micro FIT cable allows to supply the modem.
3.2.2.2 USB 2.0 Cable with connectors A Male and mini B Male
The USB cable A Male and mini B Male allows the dialog via the USB port between the GenPro 30e and a
communication terminal.
Mini B Type A
Component Characteristics
4-pin Micro FIT connector Supplier : MOLEX
Cable Length ≈ 1.5m
Wire Tinned copper 24 x 0.2 mm
Section : 0.75 mm²
Fuse F2.5A L250V
Pin N°
Mini B Type A
Description
1 1 NC
2 2 Data (D-)
3 3 Data (D+)
4 NC NC
5 4 Ground (GND)
Component Characteristics
Cable USB 2.0 Length ≈ 80cm
USB A Male
USB mini B Male
Molex connector
Micro FIT 3.0
Black wire (GND)
5mm stripped and
tinned wire
Red wire (+VDC)
2.5A/250V fuse
(5 x 20 mm)
View from cable side