Specifications

p 2
Eraser Company Inc. • Syracuse, NY USA • Ph: 315-454-3237 • [e-mail] • www.eraser.com • Fax [phone]
MODEL WC601A AUTOMATIC
WIRE & TUBING CUTTER
ORDERING INFORMATION
{AR7121} Variable Speed Wire & Tubing Cutter
...........................................120V, 60Hz, Up to 90 PSI
INCLUDED PARTS
WC601A ships with the following parts/tools:
- Qty 1 of 5/64” allen wrench for the bushing & feed
belt pully set screws (Part: TG3028)
- Qty 1 of 3/32” allen wrench for the material exit
chute screw (Part: TG3790)
- Qty 2 of part PR0232 feed belt (installed)
- Qty 1 of part IR5161 wire cut blade installed
- Qty 1 of part PR2727 IEC power cord
OPTIONAL ACCESSORIES
{AR0010} DE100 ........... Optional Turntable Dereeler
{AR3801} DE400 .............. Optional Vertical Dereeler
{AR0170} DE700 ... Optional Compensating Dereeler
IR5162 ............. Optional Carbide Wire Cutting Blade
IR5218 ......................... Optional Tube Cutting Blade
PR0003.............. Optional Regulator/Filter/Lubricator
IR0755 ............Standard bushing set 1/8” (3.175mm)
IR0756 ................Standard bushing set 1/4” (6.3mm)
IR0757 ..............Standard bushing set 3/8” (9.53mm)
IR0903 ..................... Custom bushings 1/64” to 1/32”
(.381mm - .793mm)
IR0765 ................. Custom bushing set 1/32” to 1/16”
(.793mm - 1.59mm)
IR0764 ................... Custom bushing set 1/16” to 1/8”
(1.60mm - 3.175mm)
IR0763 ..................... Custom bushing set 1/8” to 3/8”
(3.175mm - 9.525mm)
PR1068...........................One Nitrile coated feed belt
(FDA Applications) *2 per unit
PR0733....................... One polyurethane coated belt
(“Grabber” belt) *2 per unit
REPLACEMENT PARTS
IR5161 ................... Replacement Wire Cutting Blade
PR0232.................One Replacement Belt *2 per unit
Always Moving Forward®
WC601A Linear Speeds
Feedrate # inches/sec cm/sec
0 4.3 11.0
1 8.7 22.1
2 13.0 33.1
3 17.4 44.2
4 21.7 55.2
5 26.1 66.3
6 30.4 77.3
7 34.8 88.3
8 39.1 99.4
9 41.3 104.9
Production rates (in pieces per hour) at various feedrates
Feedrate # /
Length
1” 2” 6” 10” 20” 100”
0 5,792 4,129 2,009 1,327 718 154
1 6,058 4,411 2,571 1,935 1,196 295
2 6,963 5,354 3,363 2,613 1,679 435
3 8,042 6,495 4,359 3,410 2,207 578
4 8,366 6,843 4,689 3,781 2,549 707
5 8,533 7,024 4,858 3,992 2,801 827
6 8,731 7,240 5,062 4,192 3,032 943
7 8,822 7,339 5,157 4,279 3,180 1,049
8 8,822 7,339 5,157 4,279 3,237 1,140
9 8,822 7,339 5,157 4,279 3,251 1,183
SPECIFICATIONS
Maximum cut length ................ 99,999” or 99,999 cm
@ +/- 1% accuracy
Minimum cut length ................ 0.1” (0.25 cm) or less;
material dependent @ up to +/- 0.005” accuracy
Maximum material size:
Tubing ................................0.375” OD (3/8”) (9.5mm)
Wire ...............................10AWG (2.58mm) stranded,
or 12AWG (2.05mm) solid
Tolerance ..............................1% or better dependent
on material and feed
Batching...................up to 99 programmable batches
Blade ................................... Hardened Ground Steel
Power ................................................................ 120V
Air .............................................. up to 90PSI (6.2bar)
Size.............14” x 13” x8.75” (36cm x 46cm x 23cm)
Weight .................................................24lbs.(10.9kg)
Feed rates ........................... 10 selectable feed rates