Manual

Nissan/Infiniti
ERASING CODES
Chapter 4 32
ERASING CODES
•
Always observe safety precautions whenever working on a
vehicle.
•
Erase codes only when all repairs have been completed.
Refer to “Nissan Erasing Procedures” or “Infiniti Erasing
Procedures” for specific instructions for your year, make
and model.
•
After erasing codes, verify that repairs were successfully
completed. Start the engine and warm to normal
operating temperature. After normal operating
temperature is reached, turn off the ignition and repeat
the code retrieval procedure for your vehicle. If no codes
are retrieved, the repair(s) was successful.
Nissan Erasing Procedures
Model Years Procedure
Altima 93-95 After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Axxess 90 After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Maxima 87-92 After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
93-94 After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
NX 91-93 After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Path- 87-95 After codes have been retrieved turn selector fully clockwise.
finder After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Hard- 87-95 After codes have been retrieved turn selector fully clockwise.
body After the LED’s have blinked four times turn the selector
Pickup fully counterclockwise. ECU code memory is now erased.
Pulsar 88-90 After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Sentra 88-90 After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
91-95 After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.