Manual

Using the Diagnostic Tool

I/M READINESS TESTING

58 OBD2

4. When a Monitor's Trip Drive Cycle is performed properly, the

Monitor icon on the Diagnostic Tool’s LCD display changes from

"flashing" to "solid,” indicating that the Monitor has run and finished

its diagnostic testing.

 If, after the Monitor has run, the MIL on the vehicle's dash is not

lit, and no stored or pending codes associated with that

particular Monitor are present in the vehicle's computer, the

repair was successful.

 If, after the Monitor has run, the MIL on the vehicle's dash lights

and/or a DTC associated with that Monitor is present in the

vehicle's computer, the repair was unsuccessful. Refer to the

vehicle's service manual and recheck repair procedures.