Specifications

INTRODUCTION
The SODIR Model RBE-4 rotisseries are designed to offer quality food cooking and roasting. The
units are constructed of food service quality stainless steel and tinted tempered (safety) glass. The
rotisseries are front-loading units that feature infrared quartz elements as a source of heat, an
attractive roast / hold / display cabinets and the see-through doors that can be successfully used in a
deli or other facilities where customers can watch food preparation. Model RBE-4 comes equipped
with one roasting spit that will hold up to 4 standard size chickens and a warming shelf that will
hold up to 10 birds. The unit is furnished with an ON/OFF switch, rotary control switch that allows
to use either two heating elements turned on, or just one element working. An indicator (red) light
lets operator know when the element(s) are on. The cabinet is equipped with a lamp located over
the warming shelf for better display of the cooked product.
SPECIFICATIONS
Model Electrical Plug Configuration
RBE-4 208/240V, 1PH, 2.2KW, 9/11A NEMA-6-15P
INSTALLATION
The SODIR rotisserie needs to be connected to a grounded outlet of proper voltage (208V or
240V). DO NOT place the unit in a damp area or near steam sources. Consult your local authorities
to determine if and what kind of ventilation is required for this type of cooking appliance.
ASSEMBLY
The SODIR rotisserie comes from the factory assembled, but with the doors and deflector plates
removed for shipping.
Door Mounting: The doors are supplied with one top hinge attached to the door. The other
hinges are packed in the carton. To mount the doors, put a metal bushing provided on the shaft of
the attached top hinge; then place the hinge with the bushing into the hole on the top. Next, place
the second hinge (provided) with the bushing into the hole on the bottom and slide the glass door
into the hinge. Align the hole in the door with the hole in the hinge, then attach the door to the
bottom hinge using the screw, flange and nut provided. Repeat the mounting procedure for the
opposite door (see drawing below).