Specifications

desired temperature. The green light will stay on until the set time is elapsed. Allow 7 to 15
minutes for the preheating process.
Note: to preheat the oven in its convection mode, keep the door closed. The blower fan and
heating element assembly will not operate if the oven's door is open
COOKING WITH CONVECTION
After the preheat process is completed, make sure that the operating mode switch is turned to
"convection" position, select the desired temperature (unless it is already set) and turn the timer
knob to select the time setting. When the set time is elapsed, the heating element and the blower
fan will be switched off and the green indicator light will go out.
Note: to operate the oven in its convection mode, keep the door closed. The blower fan and
heating element assembly will not operate if the oven's door is open
FINISHING /BROILING
To finish or broil, make sure that the operating mode switch is turned to "broiling" position, then
turn the timer knob to select the timer setting. When the set time is elapsed, the quartz broiling
elements will be switched off and the green indicator light will go out.
Note: to operate the oven in its broiling mode, keep the door partially open. The door hinge is
designed to keep the door stable in partially open position. The quartz broiling elements will not
operate if the door is closed
The SODIR convection/broiler ovens can be used for a wide variety of foods. Cooking times will
vary depending on food products, temperature settings and desired results.
CLEANING
WARNING: Disconnect (unplug) electrical power supply before cleaning
Cleaning is very important in maintaining a safe and well working machine. Allow the oven to
cool before cleaning. Remove the baking racks and the bake pan, and clean them separately using
a damp cloth or sponge and mild cleaning liquid soap. Use a cloth dampened slightly with a soap
and water mixture to clean all exterior and interior stainless steel surfaces. Use a clean lint-free
cloth to remove the excess water or soap.
DO NOT use an abrasive sponge on exterior or interior surfaces
DO NOT wash the oven under running water
DO NOT spray the exterior motor housing with any liquid