Specifications

6
3.3 Notice for Sun Micro System user
Since some Sun Micro system will detect the monitor information, if system fail to get information
from the Monitor, then you won’t get any screen came out. So for safety, “YOU MUST SWITCH
USB KVM SWITCH TO THE SUN MICRO SYSTEM” before you power on the Sun Micro System.
After you seeing the screen from the Sun Micro System, then you can switch to any other Host. If
you have multiple Sun Micro systems, then you have to repeat this procedure one by one.
3.4 Hot Swappable
The 2-port USB Cable KVM Switch supports hot-swap technology. All the components can be
added or removed at any time without shutting the PC down.
3.5 Driver Installation (Windows 98/SE only)
After you connect the 2-port USB Cable KVM Switch to your PC, Win 98 will automatically detect
the device and prompt for the driver installation. Please install the 2-port USB Cable KVM Switch
by the following instruction from Step A-E. Please have your Windows 98 CD ready.
Fig. A
Fig. B
A. Press “Next” to Continue.
(Ref. Fig. A)
B. Select “Search for the best
driver for your device” and
press “Next” to continue.
(Ref. Fig. B).