Instruction manual

Instruction Manual
3
Hardware Guide
To link the SV215MICDVIA to the console display unit, use a Male-Male
DVI cable to connect the Console display connector to the DVI port on the
display device being used. Connect the remaining Console connectors to
the speakers, microphone, and USB Keyboard/Mouse, according to the
following color coding:
To connect a host to the SV215MICDVIA, connect the black DVI cable
to your computer’s DVI port. Connect the remaining cable-ends to the
corresponding USB and 3.5mm ports (keyboard, mouse, speakers, and
microphone), as appropriate, based on the color coding detailed above.
* The cable connecting the Master unit to Host 1 is 24”, while the cable
connecting the Console unit to Host 2 is 47”.
Color Connection
Pink
Microphone (optional)
Purple
USB Keyboard
Green
3.5” Audio
Black
USB Mouse
To Host 1
To Console
To Host 2
*
Remote
Selector Input