2 Port DVI+ USB Cable KVM Switch with Audio SV215MICDVIA
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Features.......................................................................................1 Package Contents........................................................................1 System Requirements.................................................................... 2 Console Requirements.................................................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com SV215MICDVIA 2 Port DVI + USB Cable KVM Switch with Audio. Supporting superior video quality with resolutions of up to 1920x1200, this KVM On-a-Cable switch is an ideal solution to access and control two desktop computers, while eliminating wasted deskspace. Features • Compatible with all USB supported operating systems.
Instruction Manual System Requirements Console Requirements • A DVI monitor capable of the highest resolution that you will be using on any computer in the installation • A USB Keyboard and Mouse • A microphone and a pair of speakers (optional) Computer Requirements • A DVI video port • A USB port for the keyboard, a USB port for the mouse, and a USB host controller • Speaker and microphone ports (optional) 2
Instruction Manual Hardware Guide To Host 1 To Host 2 * To Console Remote Selector Input * The cable connecting the Master unit to Host 1 is 24”, while the cable connecting the Console unit to Host 2 is 47”. To link the SV215MICDVIA to the console display unit, use a Male-Male DVI cable to connect the Console display connector to the DVI port on the display device being used.
Instruction Manual Hardware Review Keyboard Emulation Mapping Mac Keyboard To initialize Mac keyboard mapping, please execute the following hotkey sequence: [scroll],[scroll], [F2], [Enter] or [ctrl] [ctrl] [F2] [Enter] Once this has been done, the following keyboard mapping will apply: PC Keyboard Mac Keyboard PC Keyboard Mac Keyboard [Shift] [Ctrl] Shift [Enter] Return Ctrl [Back Space] Delete [Ins] Help [Ctrl] [Win] F15 [Ctrl], 1 [Ctrl], 2 [Ctrl], 3 [Ctrl], 4 [ÿ] F12 [Alt] L Alt/Option
Instruction Manual Installation Before you begin, ensure that the power to all the devices you will be connecting has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer. To prevent damage to your equipment, make sure that all the devices you will be connecting are properly grounded. 1.
Instruction Manual Operation Manual Port Selection Port Selection Button Press the port selection button to toggle the KVM and Audio focus between the two computers. The Port LED will illuminate indicating that the corresponding port is currently selected. Note: Do not switch ports while a USB device (printer, external drive, etc.) is in progress. Switching ports will terminate the operation. Invoking Hotkey Mode All Hotkey operations begin by tapping the Scroll Lock key twice.
Instruction Manual Hotkey Summary Table Hotkey Sequence Action Toggles the KVM and Audio focus between the [Scroll Lock] [Scroll Lock] two ports. [Enter] Note: If the KVM and Audio focus are on different ports, only the KVM focus switches. [Scroll Lock] [Scroll Lock] Toggles the hotkey invocation key between the [x] [Enter] Scroll Lock key and the Control key [Scroll Lock] [Scroll Lock] Only toggles the KVM focus. [k] [Enter] [Scroll Lock] [Scroll Lock] Only toggles the audio focus.
Instruction Manual Specifications Function Specification Computer Connections 2 Keyboard Console Ports Connectors KVM Ports 1 x DVI Male (Black) Mouse 1 x USB Type A Female (Black) Speaker 1 x Mini Stereo Jack Female (Green) Microphone 1 x Mini Stereo Jack Female (Pink) Keyboard 2 x USB Type A Male (Purple) Video 2 x DVI Male (Black) Mouse 2 x USB Type A Male (Black) Speaker 2 x Mini Stereo Plug Male (Green) Microphone 2 x Mini Stereo Plug Male (Pink) Remote Switch 1 x Mini Stereo
Instruction Manual Environment Physical Properties Function Specification Scan Interval 3, 5, 10, 20 Seconds Operating Temp. 0-50°C Storage Temp. -20-60°C Humidity 0-80% RH, Non-condensing Housing Plastic Weight 0.62kg Dimensions (L x W x H) 8.45 x 3.40 x 2.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
