Installation guide

Manual_Page 2
www.equip-info.net
Important Note:
We suggest that you read the following steps carefully in advance in order to fully under-
stand the installation method of this equipment for obtaining maximum efficiency.
Package Contents
1. 3.5” Multi Front Panel
2. Setup CD
3. Slot bracket
4. Octopus cable for FireWire, USB and SATA connection
5. SATA connection cable
6. Y-cable with 2x audio plug
7. USB connection cable
8. Set of screws
Driver and Hardware Installation
For Windows Vista/XP/2000/ME system, drivers are all provided by the operating
systems, no additional driver needed. The card reader will be recognized by OS
automatically once it is connected.
Driver Installation for Windows 98
Follow the installation guide below to complete the driver installation.
1. Insert Setup CD, and double click “AM-Reader-98Drv-Setup”
2. Click “Next” on the welcome page of “InstallShield Wizard”
3. Click “finish” to complete the installation
You will see four removable disk icons of the all-in-1 card reader on the explorer window
once you connect your card reader to the PC. The disk drive letters are determined by the
PC’s configuration which may varies.
Note: The driver installation above is designed for Windows 98 only.