Manual 3.5" Multi Front Panel + Cardreader 50plus english www.equip-info.
Manual_Page 2 Important Note: We suggest that you read the following steps carefully in advance in order to fully understand the installation method of this equipment for obtaining maximum efficiency. Package Contents 1. 3.5” Multi Front Panel 2. Setup CD 3. Slot bracket 4. Octopus cable for FireWire, USB and SATA connection 5. SATA connection cable 6. Y-cable with 2x audio plug 7. USB connection cable 8.
Manual_Page 3 Driver Installation for Mac OS 9.x 1. Decompress driver binary file in your CD, it will create two driver files in specific directory. 2. Copy these two files into Mac OS 9.x system extension directory. 3. Reboot your system. 4. Plug your card reader on USB, and use it. Picture 1 Hardware Installation Please connect the cables to the panel body as shown in picture 1. There are three cables need to be connected to the panel body.
Manual_Page 4 2. Connect the two SATA connectors to the correspondent ports on the motherboard as shown in picture 4 ( attention: these connectors have been particularly designed and can be connected only in the proper way). Finish hardware installation: Please check that all cables/connections are fixed properly and turn on the computer, the power LED of the front panel shall be on. www.equip-info.
