User`s manual

DemoKit-LG2 User’s Manual
56
10. NEC Electronics IDE and ID78K0-TK Debugger
The DemoKit-LG2.prw project workspace is included for real-time debugging with the ID78K0-TK
debugger. To initialize the integrated development environment (IDE), click Start → Programs →
NEC Tools32 → PM Plus.
Figure 65. PM Plus
To open the sample program, click File → Open → DemoKit-LG2.prw.
Figure 66. PM Plus with Sample Code
Once the workspace is open, the PM Plus Project Window lists all files associated with the project,
including the source code and header files. From PM Plus, you can edit, build and link the sample code
provided. For detailed information about the NEC Electronics software tools, refer to the associated
documents for each.
To perform debugging of the code and board make sure that the DemoKit-LG2 board is configured for
on-chip debugging. You must configure the port setting for the serial communication using the
Portconfig for ID78K0-TK from the Windows Start menu → Programs → NEC Tools32.