Manualshelf

User`s manual

ManualsBrandsEquip ManualsComputer equipmentUSB 2.0 FOR NEC CHIPSET
51525354555657585960
DemoKit-LG2 User’s Manual
52
7.6 Autoprocedure(EPV) Command Execution
Click Device → Autoprocedure(EPV) to execute the Blank Check, Erase, Program, and Verify
commands in succession.
Figure 63. After EPV Execution
"...finish" is
displayed.
7.7 Terminating the GUI
Click File → Quit to terminate the GUI software. All settings in effect upon termination are preserved
in the FPL3.INI file for recall at the next session.
7.8 78K0_LCD_DEMO Application
Switch SW1/S1 to OFF to set the DemoKit-LG2 board to normal operation. Press the SW2 reset button
to exit normal operation.