User`s manual

DemoKit-LG2 User’s Manual

10. Click the Advance tab.

Figure 60. Device Setup Dialog Box: Advance Tab

11. Select Blank check before Erase and then click OK to set the parameters.

Figure 61. Completion of Parameter Setting

The display is

updated.

PRM File Read

OK is displayed.

7.5 Selecting a User Program

1. Click File → Load.

2. Select a program file to be written to the target device and then click

Open.

Figure 62. After Downloading

"Success read HEX

file." is displayed.

The display is

dated.