User`s manual

DemoKit-LG2 User’s Manual
50
Figure 57. Parameter File Selection
7. In the Port box, select the communication port that matches the host computer being used.
8. In the Speed box, select the communication speed of the host connection.
Figure 58. Port Selection
Note: Ports can be selected using Device Manager, as explained in Section 5.3, “Confirmation of USB
Driver Installation.”
9. Set "Supply oscillator" according to the specifications of the DemoKit-LG2 board, “Frequency =
6.00 MHz” and “Multiply rate = 1.00”. In "Operation Mode", specify the “Chip” mode. The
following figure shows the recommended settings:
Figure 59. Standard Property Settingss