User`s manual

DemoKit-LG2 User’s Manual

6.3.1.1

Load Command

The Load command selects the file to be programmed into the MCU’s flash memory.

Figure 46. Open Dialog Box

The Open dialog box displays the directory containing the most recently loaded user program.

After the program is loaded, the checksum is calculated, and the result displayed in the

Programmer Parameter window.

6.3.1.2 Quit Command

The Quit command terminates the FPL3 GUI software. (Clicking × on the right of the task bar

also terminates the FPL3 GUI software.)

User settings are saved in the FPL3.INI file to preserve them for the next session. FPL3.INI is

stored in the Windows folder in Windows 98SE, Windows Me, and Windows XP operating

systems. In Windows 2000, FPL3.INI is stored in the Winnt folder.)