User`s manual

DemoKit-LG2 User’s Manual
6. FPL3 Flash Programming Software
The MCU’s parameter file is automatically stored in the <FPL3 install-path>\PRM folder during
installation of the FPL3 GUI. Nevertheless, the most up-to-date file can be downloaded from the NEC
Electronics America web site at
http://www.am.necel.com/microcontrollers/devtools.php and copied
into <FPL3.EXE-install-path>\PRM. Refer to Section 5.2, “Software Installation.”
6.1 Starting the GUI Software
On the Start menu, click FPL3.EXE to initialize the GUI software (Figure 43).
Figure 43. Main Window of the GUI Software
Menu Bar
Toolbar
Action Log Window
Status Bar
Programmer
Parameter
Window
Table 10. Components of the Main Window
Name Description
Menu ba
r
Dis
p
la
y
s FPL3-executable commands
Toolba
r
Dis
p
la
y
s icons of fre
q
uentl
y
used commands
Action Lo
g
window Dis
p
la
y
s FPL3 action lo
g
Pro
g
rammer Parameter window Dis
p
la
y
s
p
ro
g
rammin
g
p
arameter settin
g
s
Status ba
r
Dis
p
la
y
s status info
r
mation
6.2 Toolbar
The toolbar contains buttons for executing FPL3 commands (Figure 44).
Figure 44. Toolbar Buttons
Device → Setup button
File → Load button
39