User`s manual

DemoKit-LG2 User’s Manual
24
5. Installation and Operation
The Windows-based FPL3 flash programming software enables selection and downloading of
application programs to the DemoKit-LG2 board. The board communicates with a host computer via a
USB interface that must be installed properly before you can download and run a program.
Figure 13. CD-ROM Directory Structure
DemoKit-LG2 (F:)
CD-ROM ROOT
fscommand
NECTools
- NEC Electronics Software Tools
FPL3
- FPL3 flash programming software
Drivers
… USB driver
FPL3
… FPL3 setup directory
PRM
… PRM parameter files
SampleProgram
- Sample program for DemoKit-LG2
Documentation
- Documentation
5.1 Hardware Installation
Connect the board to the host computer using the provided USB interface cable.
5.2 Software Installation
The DemoKit-LG2 package comes with several software demo packages:
 NEC Electronics software tools for 78K0 MCUs, including a C compiler, assembler, linker,
librarian and ID78K0-TK/ID78K0-QB debuggers.
 FPL3 flash programming software
 Sample program
5.2.1 Software Tools
To install the NEC Electronics software tools for 78K0 MCUs, select the SETUP program in the
\fscommand\NECTools\ directory of the CD-ROM. The Setup boxes will guide you through the
installation process. The product ID for DemoKit-LG2 is 00101386V.
5.2.2 FPL3 Flash Programming GUI Installation
To install the FPL3 flash programming GUI, select the SETUP program in the \fscommand\FPL3\
directory of the CD-ROM. The Setup boxes will guide you through the installation process.