User`s manual

DemoKit-LG2 User’s Manual

Figure 3. Bottom View of Board Connectors and Switches

CN2

BAT1

Some of the DemoKit-LG2 components are available for user application hardware and software. Please

read the MCU user’s manual carefully to get information about the electrical specification of the

available I/O ports before connecting any external signals to the DemoKit-LG2 board.

3.1 Jumper JP1: Power Supply Selection

The different power supply modes can be set using jumper JP1. The JP1 jumper controls the power

supply during standalone mode, flash programming and on-board debugging. Additionally, power can

be applied using the QB-78K0MINI on-chip debugging emulator or JP2 jumper.