Specifications
58
Accessories for 19" Network Cabinet DELTA S
Base for 19" Network Cabinet DELTA S
item no
WxHxD in mm
grey black
922266 992266 600 x120x600
922268 992268 600 x120x800
922269 992269 600 x120x900
922060 992261 600 x120x1000
922288 992288 800 x120x800
922289 992289 800 x120x900
922290 982289 800 x120x1000
922282 992282 800 x120x1200
Accessories for 19" Network Cabinet DELTA S
item no.
922447
992447
922427
922437
Fan units for base or top cover installation
Stabilizers for Delta S network cabinets, tilt
prevention, mounted on the base. 4pcs, RAL
7035 light grey
Stabilizers for Delta S network cabinets, tilt
prevention, mounted on the base. 4pcs, RAL
9005 black
4pcs Set of castors, 2pcs with brake, max. load
of 4 castors 200kg minus cabinet weight
4pcs Set of castors, 2pcs with brake, max. load
of 4 castors 800kg minus cabinet weight
19" wall-mounted Cabinet DELTA 4S
The fully welded wall-mounted cabinet is a classic
for medium size installations.
The one-sectioned 19” wall-mounted cabinet with
IP 30 protection has a robust welded construction.
High quality processing and the newest technologies
ensure a long operating life time. The cabinet door
is glass standardly but it can be replaced by steel or
perforated doors if required. The hinge system enables
almost 180° wide opening of the door. The door can
be easily removed and mounted for a change of the
door opening direction. The vertical 19” rails (1x pair)
can be adjusted freely in any depth of the cabinet.
This simplies the mounting of the devices and the
conguration of connecting cables.
Breakout-type Blanking Panels
The cable openings are covered with breakout-type
blanking panels are ready in the top, bottom and rear
part of the cabinet. Use a plastic frame and a blanking
panel with a brush, which is a part of the packaging, to
seal the cabinet opening against dust penetration.