kvm100sk_33.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 3 COPYRIGHT & TRADEMARKS Copyright © 1999 Linksys, All Rights Reserved. ProConnect is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors.
kvm100sk_33.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 5 Introduction Introduction Congratulations on your purchase of a Linksys ProConnect KVM 2-Port Switch Kit. This handy little CPU switch lets you take instant command over two desktop or notebook PCs! Ready to run right out of the box with no software or extra cables required, the ProConnect KVM 2-Port Switch Kit lets you connect two CPUs to a single keyboard, monitor, and mouse. The KVM 2-Port Switch Kit comes with everything you need - a switch and two cables.
kvm100sk_33.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 7 Introduction Windows 95 Keyboards Compatible with All Major PS/2 Mice No Software Required Sturdy Chassis and Quality Connectors for Long Life Professional Grade Cables Included Free Technical Support 1 Year Limited Warranty *Note: If both computers have AT keyboard and Serial Mouse, Additional adapters must be purchased.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 8 Introduction keyboard adapter included in this package. If both of your PCs are missing PS/2 ports, you need to purchase two more adapters identical to the ones in this package. The adapters are inexpensive and easy to find. Consult the diagram below to find out whether you need to use any adapters. This is a PS/2 connector. No adapters are needed. This is a 5-Pin AT keyboard connector. Use the PS/2-to-AT adapter. This is a 9-Pin serial mouse connector.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 9 Hardware Getting to Know the Hardware If you look at your KVM switch, you will see three sets of connectors. Two of them are for CPUs, and one is labeled "Console". The console connectors are where you will attach your monitor, keyboard, and mouse that you will be using to control your two remote CPUs.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 10 Hardware Cables For your convenience, you can use any standard extender cables to connect your PCs to the switch. However, we recommend that you use the provided custom-built cables that were provided with the switch. Not only will this simplify the installation procedure and help keep your work area free of excess cable clutter, but it will also help to protect the integrity of your data. It is not recommended that you use cables longer than 6 feet, (1.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 11 Hardware Installing the Hardware Before you begin, make sure that the KVM Switch and both PCs you will be connecting are turned OFF. 1. Find the set of connectors marked Console on the right face of the KVM Switch. Plug in your mouse, keyboard, and monitor here. 2. Connect the ends of the custom extender cable (included with the KVM Switch Kit) to the keyboard, monitor, and mouse ports of your first PC.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 12 Hardware 6. Power on the PCs that are connected to the switch. One of the LEDs on the switch will light up indicating which PC is being controlled. To monitor the other PC, press the select button on the KVM switch. Using the Hot Keys The KVM switch is able to navigate between the two PCs using the console's keyboard. This allows you to switch between PC 1 and PC 2 without having to touch the switch.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 13 Hot Keys Auto Scan Mode The KVM Switch can also scan between the two PCs at set intervals. Once this mode has been set, the switch will scan back and forth between the two PCs until you tell it to stop. 1. Press and release ALT, then CTRL, then SHIFT, all one at a time. 2. Press and release 0 (zero) 3. Hit Enter The switch will cycle between the two PCs continuously until you press the spacebar. The KVM switch then returns to normal operation.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 14 Appendix Troubleshooting General Troubleshooting Hints If you are experiencing problems, first be sure that your cables are connected properly, make sure that there are no problems with your cables, and be certain that all of your PC hardware is fully operational. Also, if either of your PCs have a power saving feature for the keyboard, it is important that you disable it. The KVM switch draws power from the keyboard ports on the two PCs.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 15 Appendix Specific Problems Problem: The mouse won't respond Solution: Try resetting the mouse. Unplug it from the console port and then plug it back in. Try resetting the KVM switch. Turn off both PCs. If you have a power adapter connected to the KVM switch, disconnect it. Turn off your monitor, wait five seconds, then power on the PCs, the monitor and the KVM switch.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 16 Appendix Problem: The keyboard won't respond Solution: Try resetting the keyboard. Unplug it from the console port and then plug it back in. Try resetting the KVM switch. Turn off both PCs. If you have a power adapter connected to the KVM switch, disconnect it. Turn off your monitor, wait five seconds, then power on the PCs, the monitor and the KVM switch. You may have the KVM switch set in Auto Scan or Last/Next mode.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 17 Appendix LEDs The KVM switch has two LEDs. They are marked PC 1 and PC 2. The LED will turn on when the corresponding PC has been selected on the KVM switch. If the LEDs are flashing on and off regularly, the KVM switch is in Auto Scan mode. If the LEDs are flashing "on long and off short", then the KVM switch is in Last/Next mode.
kvm100sk_33.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 19 Appendix Dimensions (L x W x H) 5.0" x 3.9" x 1.3" Operating Temperature 40° - 100° F Storage Temperature 0° - 140° F Operating Humidity 0 - 80% Non-Condensing Customer Support For help with the installation or operation of your KVM 2-Port Switch Kit, contact Linksys Customer Support at one of the phone numbers or Internet addresses below. Customer Support Fax Bulletin Board Email Web FTP Site 949-261-1288 949-261-8868 949-261-2888 (33.
kvm100sk_33.qxd 2/22/99 10:50 AM Page 21 h t t p : / / w w w. l i n k s y s . c o m © Copyright 1999 Linksys, All Rights Reserved. Printed in the USA.
