User Manual

USB KVM SWITCH

2-PORT

Vision

331522

Installation

Important

- Before you begin, make sure that the power to all the

devices you w ill be connecting has been turned off.

You must unplug the pow er cords of any computers

that have the Keyboard Power On function. Otherwise,

the switch will receive power from the computer.

- To prevent damage to your equipment, make sure that

all the devices you w ill be connecting are properly

grounded.

Installing your new USB Cable KVM Switch involves the

following steps:

1. Plug your keyboard, monitor, and mouse into the

Console ports of the KVM Sw itch. Each port is

labeled with an appropriate icon.

2. Connect the KVM’s VGA cable to the VGA port on one

of your computer.

3. Connect 2 USB connectors on the same cable to the

same computer.

4. Repeat step 2 and 3 on the other computer.

5. Boot the computers.

6. Tap the remote sw itch button to sw itch betw een

computers.

Note: The Pow er On default of KVM Sw itch is link to the

first computer you turn on.

Requirements

Console

- A VGA monitor of the highest resolution that you will

be using on any computer in the installation

- A USB Keyboard

- A USB Mouse

Computers

The follow ing equipment must be installed on each

computer that is to be connected to the system:

- A VGA video port

- USB 1.1/2.0 port * 2

PAGE 1
USB KVM SWITCH 2-PORT Vision 331522 Requirements Installation Console Important - A VGA monitor of the highest resolution that you w ill - Before you begin, make sure that the pow er to all the be using on any computer in the installation devices you w ill be connecting has been turned off. - A USB Keyboard You must unplug the pow er cords of any computers - A USB M ouse that have the Keyboard Pow er On function. Otherw ise, the sw itch w ill receive pow er from the computer.
PAGE 2
Operation Place your Remote Sw itch on the desktop; tap the remote sw itch button to sw itch betw een computers. Speciﬁcations Computer Connections 2 Port Selection W ired Remote Sw itch, (1.8m) Video 2048 x 1536; DDC2B Connectors Console Ports Keyboard: 1 x USB Type A Female (Black) Video: 1 x HDB-15 Female (Blue) M ouse: 1 x USB Type A Female (Black) KVM Ports Keyboard/ M ouse: 4 x USB Type A M ale (Black) Video: 2 x HDB-15 M ale (Blue) LEDs Selected: 2 (Green) Cable Length Computers: 1.