Instruction manual

Contents
1. Overview
Megaport SS Boards ........................................................1-1
Software Driver ................................................................1-2
Adaptor Cable ..................................................................1-3
2. Installation
Assigning the ISA I/O Base Address ................................2-1
Address Log.....................................................................2-3
Board Installation .............................................................2-3
EISA System Setup..........................................................2-4
Micro Channel System Setup ...........................................2-5
Installing the Round Cable ...............................................2-6
Equinox Wiring Accessories ............................................. 2-6
3. Port to Device Cabling
Port Signal Names ...........................................................3-2
Conversion to RS-232 Signal Names ...............................3-2
Telco Connector Pinouts ..................................................3-3
Wiring to Terminal Devices ...............................................3-5
DB-25 Wiring....................................................................3-7
Modular Wiring .................................................................3-8
A. Support Procedures
Technical Support Procedures ........................................ A-1
Document Support Procedures ....................................... A-2
Index