System Instruction

Equil
®
Patch Insulin Pump System
51
6
If the needle remains in the inserter,
place the protective sleeve back onto the
needle hub. Firmly push the top of the
inserter to eject the needle hub (Figure 58)
and dispose of properly.
Figure 58
7.2 Removing the Infusion Set
Peel up one end of the tape as shown in
Figure 59 and continue to peel away from
the skin until the entire infusion set has
been removed.
Figure 59
7.3 Filling the Reservoir
1
Remove the new reservoir from the
packaging.
2
Use an alcohol wipe to clean the insulin
vial and then attach it to the fill adapter as
in Figure 60.
Dispose of the insertion needle
properly in a medical sharps container.
Note