Owner`s manual

Installation Instructions
55
HOP HOOKHOP HOOK
HEAD SCREW HEAD SCREW
LOWER HOOKLOWER HOOK
AESTHETIC PANEL’S DIMENSIONS AND INSTALLATION
1
STEP 1
Install the hook on the aesthetic wooden panel and
put the hook into the slot of the outer door of
dishwasher(see Figure 7).
After positioning of the panel , fix the panel onto the
outer door by screws and bolts (see Figure 8).Take
away the cover,then pin up the screw and get back
the cover.
Figure 7 Figure 8
The door springs are set at the factory to thproper
tension for the outer door. If aesthetic wooden
panel are installed, you will have to adjust the door
spring tension. Rotate the adjusting screw to drive
the adjustor to strain or relax the steel cable
(see Figure 9).
Figure 9
6